Robust Fuzzy Neural Network Sliding-Mode Control for Two-Axis Motion Control System
Faa-Jeng Lin; Po-Hung Shen
Industrial Electronics, IEEE Transactions on
Volume 53, Issue 4, June 2006 Page(s):1209 - 1225
Digital Object Identifier 10.1109/TIE.2006.878312
Summary:A robust fuzzy neural network (RFNN) sliding-mode control based on computed torque control design for a two-axis motion control system is proposed in this paper. The two-axis motion control system is an x-y table composed of two permanent-magnet linear synchronous motors. First, a single-axis motion dynamics with the introduction of a lumped uncertainty including cross-coupled interference between the two-axis mechanism is derived. Then, to improve the control performance in reference contours tracking, the RFNN sliding-mode control system is proposed to effectively approximate the equivalent control of the sliding-mode control method. Moreover, the motions at x-axis and y-axis are controlled separately. Using the proposed control, the motion tracking performance is significantly improved, and robustness to parameter variations, external disturbances, cross-coupled interference, and friction force can be obtained as well. Furthermore, the proposed control algorithms are implemented in a TMS320C32 DSP-based control computer. From the simulated and experimental results due to circle and four leaves reference contours, the dynamic behaviors of the proposed control systems are robust with regard to uncertainties
View citation and abstract |
Cart
