80 T Magnet Operational Performance and Design Implications

The US National High Magnetic Field Laboratory constructed and tested a stand-alone 80 T prototype magnet. The activity was in support of the insert magnet development project for the US-DOE-NSF 100 Tesla Multi-Pulse Magnet Program. The 80 T magnet assembly was developed to simulate the physical conditions an insert magnet would encounter during peak field operations at 105 T$\ldots$ The design incorporated further improvements to the engineering template developed from the 65 T and 75 T pulsed magnets now in use at the NHMFL Pulsed Field Facility at Los Alamos National Laboratory. Two coaxially nested solenoid coils comprised the 80 T prototype magnet design. The windings are in series electrically. The inner coil is constructed with materials & techniques identical to those in use for the 100 T insert program. The outer coil is a conventional winding. The prototype was successfully trained to a peak field of $\sim$80.4 T. 80 T pulsed operations were repeated until the coil assembly faulted after 10 full-field pulses. Post-fault inspection of the magnet assembly indicated that the outer magnet winding failed structurally. This paper will present an overview of the 80 T prototype's design, construction, and performance. A review of the magnets failure mode will be presented. Additionally, we will discuss new design criteria for stand alone high-field pulsed magnet based upon the 80 T prototype experience.