Home  |   Login  |   Logout  |   Access Information  |   Alerts  |   Purchase History  |   Cart  |   Sitemap  |   Help   
 
Login
BROWSE SEARCH IEEE XPLORE GUIDE SUPPORT
Article Information

Investigation of flow and heat transfer of an impinging jet in a cross-flow for cooling of a heated cube

Rundstrom, D.; Moshfegh, B.
Thermal and Thermomechanical Phenomena in Electronic Systems, 2004. ITHERM apos;04. The Ninth Intersociety Conference on
Volume , Issue , 1-4 June 2004 Page(s): 455 - 462 Vol.1
Digital Object Identifier  
Summary: The current trends towards the greater functionality of electronic devices are resulting in a steady increase in the amount of heat dissipated from electronic components. Forced channel flow is frequently used to remove heat at the walls of the channel where a PCB with a few high heat dissipating components is located. The overall cooling strategy thus must not only match the overall power dissipation load, but also address the requirements of the "ho" components. In combating the whole thermal load with forced channel flow, excessive flow rates will be required. The objective of this study is to investigate if targeted cooling systems, i.e. an impinging jet in combination with a low velocity channel flow can improve the thermal performance of the system. The steady-state 3-D model is developed with the Reynolds-Stress-Model (RSM) as turbulence model. The geometrical case is a channel with a heated cube in the middle of the base plate and two inlets, one horizontal channel flow and one vertical impinging jet. The numerical model is validated against experimental data obtained from three well-known cases, two cases with impinging jet on a flat heated plate and one case with a heated cube in a single channel flow. The effects of the jet Re and jet to-cross-flow velocity ratio are investigated. The airflow pattern around the cube and the surface temperature of the cube as well as the mean values and local distributions of the heat transfer coefficient are presented.

» View citation and abstract

IEEE Members

Log in by entering your IEEE Web Account Username and Password.

IEEE Communications Society members: If you subscribe to the IEEE Electronic Periodicals Package or IEEE Electronic Periodicals Package Plus, you must access your subscription at www.comsoc.org.

Users at Subscribing Institutions

Check with your librarian, information professional, or system manager to determine if you need to log in. Please complete the online Technical Support Form if you need assistance.

Already Purchased This Article?

Select the Purchase History link to access the document. You will have 5 Days after purchase to access the Full Text PDF. Please complete the online Technical Support Form if you need assistance.

Guests

• Search and access Abstract records free of charge
Register for table of contents alerts
• Purchase Full Text PDF documents

» Learn more about subscription options or how to become an IEEE Member.

You are not logged in.
LOGIN
Username
Password
GO
» Forgot your password?
Please remember to log out when you have finished your session.
You must log in to access:
• Advanced or Author Search
• CrossRef Search
• AbstractPlus Records
• Full Text PDF
• Full Text HTML
Access this document
» Buy this document now
» Learn more about
» Learn more about
   purchasing articles
   and standards
Learn more about IEEE Subscriptions
Indexed by IEE Inspec
© Copyright 2009 IEEE – All Rights Reserved