| 4a-2001 |
 |
Active - Amendment to IEEE standard techniques for high-voltage testing
|
|
|
|
| 18-2002 |
|
Active - IEEE Standard for Shunt Power Capacitors
Revision of 18-1992
|
|
|
|
| 32-1972 |
|
Active - IEEE standard requirements, terminology, and test procedure for neutral grounding devices
Reaffirmed 1997
|
|
|
|
| 43-2000 |
|
Active - IEEE recommended practice for testing insulation resistance of
rotating machinery
|
|
|
|
| 48-2009 |
|
Active - IEEE Standard for Test Procedures and Requirements for Alternating-current Cable Terminations Used on Shielded Cables Having Laminated Insulation Rated 2.5 kV through 765 kV or Extruded Insulation Rated 2.5 kV through 500 kV
|
|
|
|
| 62.2-2004 |
|
Active - IEEE Std 62.2 - 2004 IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus
|
|
|
|
| 67-2005 |
|
Active - IEEE Guide for Operation and Maintenance of Turbine Generators
Revision of 67-1990
|
|
|
|
| 80-2000 |
|
Active - IEEE guide for safety in AC substation grounding
|
|
|
|
| 81-1983 |
|
Active - IEEE guide for measuring earth resistivity, ground impedance, and earth surface potentials of a ground system
|
|
|
|
| 95-2002 |
|
Active - IEEE recommended practice for insulation testing of AC electric machinery (2300 V and above) with high direct voltage
Reaffirmed 2007 Revision of 95-1977
|
|
|
|
| 112-2004 |
|
Active - IEEE Standard Test Procedure for Polyphase Induction Motors and Generators
Revision of 112-1996
|
|
|
|
| 115-1995 |
|
Active - IEEE Guide: Test Procedures for Synchronous Machines
|
|
|
|
| 120-1989 |
|
Active - IEEE master test guide for electrical measurements in power
circuits
|
|
|
|
| 122-1991 |
|
Active - IEEE recommended practice for functional and performance
characteristics of control systems for steam turbine-generator
units
Reaffirmed 1997,2003
|
|
|
|
| 141 Self-Study Course (IEEE Red Book) |
|
Active - Fault Calculations in Industrial/Commercial Power Systems - IEEE Red Book Self-Study Course
|
|
|
|
| 141-1993 (Red Book) |
|
Active - IEEE recommended practice for electric power distribution for industrial plants. (Color Book Series - Red Book)
An Errata is available Reaffirmed 1999
|
|
|
|
| 142-2007 (Green Book) |
|
Active - IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems. (Color Book Series - Green Book)
|
|
|
|
| 241-1990 (Gray Book) |
|
Active - IEEE recommended practice for electric power systems in commercial buildings. (Color Book Series - Gray Book)
|
|
|
|
| 242-2001 (Buff Book) |
|
Active - IEEE recommended practice for protection and coordination of industrial and commercial power systems. (Color Book Series - Buff Book)
An Errata is available
|
|
|
|
| 277-2007 |
|
Active - IEEE Recommended Practice for Cement Plant Power Distribution
Revision of 277-1994
|
|
|
|
| 303-2004 |
|
Active - IEEE Std 303 - 2004 IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
Revision of 303-1991
|
|
|
|
| 315-1975 |
|
Active - Graphic Symbols for Electrical and Electronics Diagrams (Including Reference Designation Letters)
|
|
|
|
| 367-1996 |
|
Active - IEEE recommended practice for determining the electric power
station ground potential rise and induced voltage from a power
fault
|
|
|
|
| 386-2006 |
|
Active - IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Above 600 V
|
|
|
|
| 387-1995 |
|
Active - IEEE standard criteria for diesel-generator units applied as
standby power supplies for nuclear power generating stations
Reaffirmed 2001, 2007 An interpretation is available
|
|
|
|
| 393-1991 |
|
Active - IEEE standard for test procedures for magnetic cores
Reaffirmed 2007
|
|
|
|
| 399-1997 (Brown Book) |
|
Active - IEEE recommended practice for industrial and commercial power systems analysis. (Color Book Series - Brown Book)
|
|
|
|
| 400-2001 |
|
Active - IEEE Guide for field testing and evaluation of the insulation of shielded power cable systems
Revision of 400-1991
|
|
|
|
| 400.2-2004 |
|
Active - IEEE guide for field testing of shielded power cable systems using very low frequency (VLF)
|
|
|
|
| 404-2006 |
|
Active - IEEE standard for extruded and laminated dielectric shielded cable joints rated 2500 V to 500 000 V
|
|
|
|
| 421.5-2005 |
|
Active - IEEE Std 421.5 - 2005 IEEE Recommended Practice for Excitation System Models for Power System Stability Studies
An interpretation is available Revision of 421.5-1992
|
|
|
|
| 446-1995 (Orange Book) |
|
Active - IEEE Recommended Practice For Emergency And Standby Power Systems For Industrial And Commercial Applications. (Color Book Series - Orange Book)
|
|
|
|
| 449-1998 |
|
Active - IEEE standard for ferroresonant voltage regulators
Reaffirmed 2007
|
|
|
|
| 463-2006 |
|
Active - IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
|
|
|
|
| 485-1997 |
|
Active - IEEE recommended practice for sizing lead-acid batteries for
stationary applications
Reaffirmed 2003 An interpretation is available
|
|
|
|
| 487-2007 |
|
Active - IEEE Recommended Practice for the Protection of Wire-Line Communication Facilities Serving Electric Supply Locations
Revision of 487-2000
|
|
|
|
| 493-2007 (Gold Book) |
|
Active - IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems. (Color Book Series - Gold Book)
An Errata is available Revision of 493-1997 (Gold Book)
|
|
|
|
| 499-1997 |
|
Active - IEEE recommended practice for cement plant electric drives and
related electrical equipment
|
|
|
|
| 515-2004 |
|
Active - IEEE standard for the testing, design, installation, and maintenance of electrical resistance heat tracing for industrial applications
Revision of 515-1997
|
|
|
|
| 519-1992 |
|
Active - IEEE recommended practices and requirements for harmonic control in
electrical power systems
An Errata is available
|
|
|
|
| 525-2007 |
|
Active - IEEE Guide for the Design and Installation of Cable Systems in Substations
|
|
|
|
| 532-2007 |
|
Active - IEEE Guide for Selecting and Testing Jackets for Power, Instrumentation, and Control Cables
|
|
|
|
| 551-2006 (Violet Book) |
|
Active - IEEE Recommended Practice for Calculating Short-Circuit Currents in Industrial and Commercial Power Systems. (Color Book Series - Violet Book)
|
|
|
|
| 576-2000 |
|
Active - IEEE recommended practice for installation, termination, and
testing of insulated power cable as used in industrial and commerical
applications
|
|
|
|
| 592-2007 |
|
Active - IEEE Standard for Exposed Semiconducting Shields on High-Voltage Cable Joints and Separable Connectors
|
|
|
|
| 602-2007 (White Book) |
|
Active - IEEE Recommended Practice for Electric Systems in Health Care Facilities. (Color Book Series - White Book)
|
|
|
|
| 605-1998 |
|
Active - IEEE guide for design of substation rigid-bus structures
An Errata is available
|
|
|
|
| P605a/D2, Sept 2009 |
|
Active Unapproved Draft - IEEE Draft Guide for Bus Design in Air Insulated Substations-Amendment 1
|
|
|
|
| 666-2007 |
|
Active - IEEE Design Guide for Electric Power Service Systems for Generating Stations
|
|
|
|
| 693-2005 |
|
Active - IEEE Std 693 - 2005 IEEE Recommended Practice for Seismic Design for Substations
Revision of 693-1997
|
|
|
|
| 730-2002 |
|
Active - IEEE Standard for Software Quality Assurance Plans
Revision of 730-1998
|
|
|
|
| 739-1995 (Bronze Book) |
|
Active - IEEE Recommended Practice For Energy Management In Industrial And Commercial Facilities. (Color Book Series - Bronze Book)
|
|
|
|
| 762-2006 |
|
Active - IEEE standard definitions for use in reporting electric generating unit reliability, availability, and productivity
|
|
|
|
| 835-1994 |
|
Active - IEEE Std 835-1994 - IEEE Standard Power Cable Ampacity Tables
|
|
|
|
| 837-2002 |
|
Active - IEEE standard for qualifying permanent connections used in substation grounding
Revision of 837-1989
|
|
|
|
| 841-2009 |
|
Active - IEEE Standard for Petroleum and Chemical Industry-Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors-Up to and Including 370 kW (500 hp)
|
|
|
|
| 844-2000 |
|
Active - IEEE Recommended pratice for electrical impedance, induction, and skin effect heating of pipelines and vessels
An Errata is available
|
|
|
|
| 859-1987 |
|
Active - IEEE standard terms for reporting and analyzing outage occurrences
and outage states of electrical transmission facilities
Reaffirmed 1993, 2002, 2008
|
|
|
|
| 902-1998 (Yellow Book) |
|
Active - IEEE guide for maintenance, operation, and safety of industrial and commercial power systems. (Color Book Series - Yellow Book)
|
|
|
|
| 946-2004 |
|
Active - IEEE Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Stations
Revision of 946-1992
|
|
|
|
| 960-1993 |
|
Active - 1. Introduction and general information
|
|
|
|
| 960-1993 |
|
Active - IEEE standard FASTBUS modular high-speed data acquisition and
control system and IEEE FASTBUS standard routines
|
|
|
|
| 977-1991 |
|
Active - IEEE guide to installation of foundations for transmission line
structures
|
|
|
|
| 979-1994 |
|
Active - IEEE guide for substation fire protection
|
|
|
|
| 980-1994 |
|
Active - IEEE guide for containment and control of oil spills in substations
Reaffirmed 2001 An interpretation is available
|
|
|
|
| 998-1996 |
|
Active - IEEE Guide for Direct Lightning Stroke Shielding of Substations
|
|
|
|
| 1015-2006 (Blue Book) |
|
Active - IEEE Recommended Practice for Applying Low Voltage Circuit Breakers Used in Industrial and Commercial Power Systems. (Color Book Series - Blue Book)
|
|
|
|
| 1015-2006/Cor 1-2007 (Blue Book) |
|
Active - IEEE Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power Systems Corrigendum 1. (Color Book Series - Blue Book)
Supplement to 1015-2006 (Blue Book)
|
|
|
|
| 1017-2004 |
|
Active - IEEE Std 1017 - 2004 - IEEE Recommended Practice for Field Testing Electric Submersible Pump Cable
Revision of 1017-1991
|
|
|
|
| 1018-2004 |
|
Active - IEEE Std 1018 - 2004 - IEEE Recommended Practice for Specifying Electric Submersible Pump Cable-Ethylene-Propylene Rubber Insulation
Revision of 1018-1991
|
|
|
|
| 1019-2004 |
|
Active - IEEE Std 1019 - 2004 - IEEE Recommended Practice for Specifying Electric Submersible Pump Cable-Polypropylene Insulation
Revision of 1019-1991
|
|
|
|
| 1048-2003 |
|
Active - IEEE guide for protective grounding of power lines
Revision of 1048-1990
|
|
|
|
| 1068-1996 |
|
Active - IEEE recommended practice for the repair and rewinding of motors
for the petroleum and chemical industry
|
|
|
|
| P1068/DB4, Jun 2009 |
|
Active Unapproved Draft - Draft Standard for the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical and Process Industries
|
|
|
|
| 1100 Self Study Course (IEEE Emerald Book) |
|
Active - Advanced Power Quality Analysis - Self-Study Course - Wireless Local Area Networks Quality of Service: An Engineering Perspective
|
|
|
|
| 1100-2005 (Emerald Book) |
|
Active - IEEE Std 1100 - 2005 IEEE Recommended Practice for Powering and Grounding Electronic Equipment. (Color Book Series - Emerald Book)
Revision of 1100-1999 (Emerald Book)
|
|
|
|
| 1106-2005 |
|
Active - IEEE recommended practice for installation, maintenance, testing, and replacement of vented nickel-cadmium batteries for stationary applications
Revision of 1106-1995
|
|
|
|
| 1110-2002 |
|
Active - IEEE Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability Analyses
Reaffirmed 2007 Revision of 1110-1991
|
|
|
|
| 1115-2000 |
|
Active - IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for
Stationary Applications
|
|
|
|
| 1115a-2007 |
|
Active - IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications Amendment 1: Additional Discussion on Sizing Margins
|
|
|
|
| 1127-1998 |
|
Active - IEEE guide for the design, construction, and operation of electric
power substations for community acceptance and environmental
compatibility
|
|
|
|
| 1159-2009 |
|
Active - IEEE Recommended Practice for Monitoring Electric Power Quality
|
|
|
|
| 1159.3-2003 |
|
Active - IEEE recommended practice for the transfer of power quality data
|
|
|
|
| 1160-1993 |
|
Active - IEEE standard test procedures for high-purity germanium crystals
for radiation detectors
|
|
|
|
| 1184-2006 |
|
Active - IEEE Guide for Batteries for Uninterruptible Power Supply Systems
|
|
|
|
| 1187-2002 |
|
Active - IEEE Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Storage Batteries for Stationary Applications
Revision of 1187-1996
|
|
|
|
| 1188-2005 |
|
Active - IEEE Recommended Practice for Maintenance, Testing, and Replacement of Valve-Regulated Lead- Acid (VRLA) Batteries for Stationary Applications
Revision of 1188-1996
|
|
|
|
| 1189-2007 |
|
Active - IEEE Guide for Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications
|
|
|
|
| 1242-1999 |
|
Active - IEEE guide for specifying and selecting power, control, and
special-purpose cable for petroleum and chemical plants
|
|
|
|
| 1243-1997 |
|
Active - IEEE guide for improving the lightning performance of transmission
lines
Reaffirmed 2008
|
|
|
|
| 1313.1-1996 |
|
Active - IEEE standard for insulation coordination - definitions,
principles, and rules
Reaffirmed 2002
|
|
|
|
| 1313.2-1999 |
|
Active - IEEE guide for the application of insulation coordination
|
|
|
|
| 1346-1998 |
|
Active - IEEE recommended practice for evaluating electric power system
compatibility with electronic process equipment
|
|
|
|
| 1349-2001 |
|
Active - IEEE Guide for the Application of Electric Motors in Class I, Division 2 Hazardous (Classified) Locations
|
|
|
|
| 1458-2005 |
|
Active - IEEE Std. 1458 - 2005 - 1458 IEEE Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications
|
|
|
|
| 1566-2005 |
|
Active - IEEE Standard for Performance of Adjustable Speed AC Drives Rated 375 kW and Larger
|
|
|
|
| 1584-2002 |
|
Active - IEEE Guide for Performing Arc-Flash Hazard Calculations
An interpretation is available
|
|
|
|
| 1584a-2004 |
|
Active - IEEE Guide for Performing Arc-Flash Hazard Calculations - Amendment 1
Amendment to 1584-2002
|
|
|
|
| P1584b/ D2, Jul 2009 |
|
Active Unapproved Draft - IEEE Guide for Performing Arc-Flash Hazard Calculations_Amendment 1: Changes to Clause 4
|
|
|
|
| 1662-2008 |
|
Active - IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships
|
|
|
|
| P3007.1/D02, Oct 2009 |
|
Active Unapproved Draft - IEEE Recommended Practice for the Operation and Management of Industrial and Commercial Power Systems
|
|
|
|
| C2-2007 |
|
Active - National Electrical Safety Code 2007 Edition 2007 TIA
An interpretation is available
|
|
|
|
| C2-2012/Preprint |
|
Active - Preprint Proposals for the 2012 Edition of the National Electrical Safety Code
|
|
|
|
| C37.04-1999 |
|
Active - IEEE standard rating structure for AC high-voltage circuit breakers
An Errata is available Reaffirmed 2006
|
|
|
|
| C37.04-1999/Cor 1-2009 |
|
Active - IEEE Standard for Rating Structure for AC High-Voltage Circuit Breakers Corrigendum 1
|
|
|
|
| C37.04a-2003 |
|
Active - IEEE standard rating structure for AC high-voltage circuit breakers rated on a symmetrical current basis amendment 1: capacitance current switching
Reaffirmed 2006
|
|
|
|
| C37.06-2009 |
|
Active - IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis ¿ Preferred Ratings and Related Required Capabilities for Voltages Above 1000 V
Revision of C37.06-2000
|
|
|
|
| C37.06.1-2000 |
|
Active - American National Standard Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated -Definite Purpose for Fast Transient Recovery Voltage Rise Times
|
|
|
|
| C37.09-1999 |
|
Active - IEEE standard test procedure for AC high-voltage circuit breakers
rated on a symmetrical current basis
Reaffirmed 2007
|
|
|
|
| C37.09a-2005 |
|
Active - IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Amendment 1: Capacitance Current Switching
Reaffirmed 2007
|
|
|
|
| C37.010-1999 |
|
Active - IEEE application guide for AC high-voltage circuit breakers rated
on a symmetrical current basis
Reaffirmed 2005
|
|
|
|
| C37.011-2005 |
|
Active - IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers
Revision of C37.011-1994
|
|
|
|
| C37.012-2005 |
|
Active - IEEE Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers
Revision of C37.012-1979
|
|
|
|
| C37.013-1997 |
|
Active - IEEE standard for AC high-voltage generator circuit breakers rated
on a symmetrical current basis
Reaffirmed 2008
|
|
|
|
| C37.1-2007 |
|
Active - IEEE standard for SCADA and automation systems
Revision of C37.1-1994
|
|
|
|
| C37.10-1995 |
|
Active - IEEE guide for diagnostics and failure investigation of power
circuit breakers
Reaffirmed 2002,2008
|
|
|
|
| C37.10.1-2000 |
|
Active - IEEE guide for the selection of monitoring for circuit breakers
|
|
|
|
| C37.11-1997 |
|
Active - IEEE standard requirements for electrical control for AC
high-voltage circuit breakers rated on a symmetrical current basis
|
|
|
|
| C37.14-2002 |
|
Active - IEEE standard for low-voltage DC power circuit breakers used in enclosures
Reaffirmed 2008 Revision of C37.14-1999
|
|
|
|
| C37.16-2000 |
|
Active - American National Standard Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors- Preferred Ratings, Related Requirements, and Application Recommendations
|
|
|
|
| C37.16-2009 |
|
Active - IEEE standard for preferred ratings, related requirements, and application recommendations for low-voltage AC (635 V and below) and DC (3200 V and below) power circuit breakers
|
|
|
|
| C37.17-1997 |
|
Active - American National Standard for Trip Devices for AC and General Purpose DC Low Voltage Power Circuit Breakers
|
|
|
|
| C37.20.1a-2005 |
|
Active - IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear Amendment 1: Short-Time and Short-Circuit Withstand Current Tests- Minimum Areas for Multiple Cable Connections
Reaffirmed 2007
|
|
|
|
| C37.20.2-1999 |
|
Active - IEEE Standard for Metal-Clad Switchgear
|
|
|
|
| C37.20.3-2001 |
|
Active - IEEE standard for metal-enclosed interrupter switchgear
|
|
|
|
| C37.20.4-2001 |
|
Active - IEEE standard for indoor AC switches (1kV-38kV) for use in
metal-enclosed switchgear
|
|
|
|
| C37.20.6-2007 |
|
Active - IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures
|
|
|
|
| C37.20.7 2007 |
|
Active - IEEE guide for testing metal-enclosed switchgear rated up to 38 kV for internal arcing faults
|
|
|
|
| C37.21-2005 |
|
Active - IEEE Standard for Control Switchboards
Revision of C37.21-1985
|
|
|
|
| C37.23-2003 |
|
Active - IEEE Std C37.23 - 2003 IEEE Standard for Metal-Enclosed Bus
Revision of C37.23-1987
|
|
|
|
| C37.24-2003 |
|
Active - IEEE guide for evaluating the effect of solar radiation on outdoor metal-enclosed switchgear
Revision of C37.24-1986
|
|
|
|
| C37.26-2003 |
|
Active - IEEE guide for methods of power factor measurement for low-voltage inductive test circuits
Reaffirmed 2009
|
|
|
|
| C37.30-1997 |
|
Active - IEEE standard requirements for high-voltage switches
|
|
|
|
| C37.34-1994 |
|
Active - IEEE standard test code for high-voltage air switches
|
|
|
|
| C37.35-1995 |
|
Active - IEEE guide for the application, installation, operation, and
maintenance of high-voltage air disconnecting and interrupter switches
|
|
|
|
| C37.40-2003 |
|
Active - IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
Reaffirmed 2009 Revision of C37.40-1993
|
|
|
|
| C37.42-1996 |
|
Active - American National Standard Specification for High-Voltage Expulsion Type Distribution Class Fuses, Cutouts, Fuse Disconnecting Switches and Fuse Links
|
|
|
|
| C37.45-2007 |
|
Active - IEEE Standard Specifications for High-Voltage Distribution Class Enclosed Single-Pole Air Switches with Rated Voltages from 1 kV through 8.3 kV
|
|
|
|
| C37.47-2000 |
|
Active - American National Standard for High Voltage Current-Limiting Type Distribution Class Fuses and Fuse Disconnecting Switches
|
|
|
|
| C37.48-2005 |
|
Active - IEEE Std C37.48 - 2005 IEEE Guide for Application, Operation, and Maintenance of High-Voltage Fuses, Destribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
Revision of C37.48-1997
|
|
|
|
| C37.53.1-1989 |
|
Active - American National Standard High-Voltage Current-Limiting Motor-Starter Fuses - Conference Test Procedures
|
|
|
|
| C37.90-2005 |
|
Active - IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus
Revision of C37.90-1989
|
|
|
|
| C37.90.1-2002 |
|
Active - C37.90.1 IEEE Standard for Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus
Revision of C37.90.1-1989
|
|
|
|
| C37.90.2-2004 |
|
Active - IEEE Standard for Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers
Revision of C37.90.2-1995
|
|
|
|
| C37.90.3-2001 |
|
Active - IEEE standard electrostatic discharge tests for protective relays
Reaffirmed 2006
|
|
|
|
| C37.91-2008 |
|
Active - IEEE Guide for Protecting Power Transformers
|
|
|
|
| C37.95-2002 |
|
Active - IEEE guide for protective relaying of utility-consumer interconnections
Revision of C37.95-1989
|
|
|
|
| C37.96-2000 |
|
Active - IEEE Guide for AC Motor Protection
Reaffirmed 2006
|
|
|
|
| C37.99-2000 |
|
Active - IEEE guide for the protection of shunt capacitor banks
Revision of C37.99-1990
|
|
|
|
| C37.100-1992 |
|
Active - IEEE standard definitions for power switchgear
|
|
|
|
| C37.101-2006 |
|
Active - IEEE Guide for Generator Ground Protection
Revision of C37.101-1993
|
|
|
|
| C37.102 - 2006 |
|
Active - IEEE Guide for AC Generator Protection
|
|
|
|
| C37.103-2004 |
|
Active - IEEE Std C37.103 - 2004 IEEE Guide for Differential and Polarizing Relay Circuit Testing
Revision of C37.103-1990
|
|
|
|
| C37.108-2002 |
|
Active - IEEE Guide for the Protection of Network Transformers
Revision of C37.108-1989
|
|
|
|
| C50.13-2005 |
|
Active - IEEE Std C50.13 - 2005 IEEE standard for cylindrical-rotor 50 Hz and 60 Hz synchronous generators rated 10 MVA and above
|
|
|
|
| C57.12.00-2006 |
|
Active - IEEE Standard for Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
|
|
|
|
| C57.12.01-2005 |
|
Active - IEEE Standard General Requirements for Dry-Type Distribution and Power Transformers, Including Those with Solid-Cast and/or Resin Encapsulated Windings
Revision of C57.12.01-1998
|
|
|
|
| C57.12.10-1997 |
|
Active - American National Standard for Transformers- 230 kV and Below 833 / 958 through 8333 / 10 417 kVA, Single-Phase, and 750 / 862 through 60 000 / 80 000 / 100 000 kVA, Three-Phase Without Load Tap Changing; and 3750 / 4687 through 60 000 / 80 000 / 100 000 kVA with Load Tap Changing- Safety Requirement
An interpretation is available
|
|
|
|
| PC57.12.10/D4.3, Jun 2009 |
|
Active Unapproved Draft - IEEE Draft Standard Requirements for Liquid-Immersed Power Transformers
|
|
|
|
| C57.12.20-2005 |
|
Active - IEEE standard for overhead-type distribution transformers, 500 kVA and smaller: high voltage, 34 500 V and below; low voltage, 7970/13 800y V and below
An interpretation is available
|
|
|
|
| C57.12.21-1992 |
|
Active - American National Standard Requirements for Pad-Mounted, Compartmental-Type Self-Cooled, Single-Phase Distribution Transformers With High Voltage Bushings; High-Voltage, 34500 GRYD/19920 Volts and Below; Low-Voltage, 240/120 Volts; 167 kVA and Smaller
|
|
|
|
| C57.12.22-1993 |
|
Active - American National Standard for Transformers- Pad-Mounted, Compartmental-Type, Self-Cooled Three-Phase Distribution Transformers With High-Voltage Bushings, 2500 kVA and Smaller: High Voltage, 34 500 Grd Y/19 920 Volts and Below; Low Voltage, 480 Volts and Below
Reaffirmed 1998, 1998
|
|
|
|
| C57.12.24-2009 |
|
Active - IEEE Standard for Submersible, Three-Phase Transformers, 3750 kVA and Smaller: High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 600 Volts and Below
|
|
|
|
| C57.12.25-1990 |
|
Active - American National Standard for Transformers - Pad-mounted, Compartmental-type, Self-cooled, Single-phase Distribution Transformers with Separable Insulated High-voltage Connectors; High Voltage, 34 500 Grdy/ 19 920 Volts and Below; Low Voltage, 240/120 Volts; 167 Kva and Smaller Requirements
|
|
|
|
| PC57.12.34/D4F, Sept 2009 |
|
Active Unapproved Draft - Draft Standard for Requirements for Pad-Mounted, Compartmental Type, Self Cooled, Three Phase Distribution Transformers, 5 MVA and Smaller; High Voltage, 34.5 kV Nominal System Voltage and Below; Low Voltage, 15 kV Nominal System Voltage and Below
|
|
|
|
| C57.12.40-2006 |
|
Active - IEEE Standard Requirements for Secondary Network Transformers, Subway and Vault Types (Liquid Immersed)
|
|
|
|
| C57.12.44-2005 |
|
Active - IEEE Standard Requirements for Secondary Network Protectors
An interpretation is available Revision of C57.12.44-2000
|
|
|
|
| C57.12.52-1981 |
|
Active - American National Standard Requirements for Sealed Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts
|
|
|
|
| C57.12.58-1991 |
|
Active - IEEE guide for conducting a transient voltage analysis of a
dry-type transformer coil
Reaffirmed 1996,2002,2008
|
|
|
|
| C57.12.59-2001 |
|
Active - IEEE guide for dry-type transformer through-fault current duration
Reaffirmed 2006
|
|
|
|
| PC57.12.60/D3, Apr 2009 |
|
Active Unapproved Draft - IEEE Draft Standard Test Procedure for Thermal Evaluation of Insulation Systems for Dry Type Power and Distribution Transformers, Including Open-Wound, Solid-Cast and Resin Encapsulated Transformers
|
|
|
|
| C57.12.80-2002 |
|
Active - IEEE standard terminology for power and distribution transformers
Revision of C57.12.80-1978
|
|
|
|
| C57.12.90-2006 |
|
Active - IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
An interpretation is available
|
|
|
|
| C57.12.91-2001 |
|
Active - IEEE standard test code for dry-type distribution and power
transformers
An interpretation is available
|
|
|
|
| C57.13.1-2006 |
|
Active - IEEE Guide for Field Testing of Relaying Current Transformers
|
|
|
|
| C57.13.2-2005 |
|
Active - IEEE Std. C57.13.2 - 2005 IEEE Standard Conformance Test Procedure for Instrument Transformers
|
|
|
|
| C57.21-2008 |
|
Active - IEEE Standard Requirements, Terminology, and Test Code for Shunt Reactors Rated Over 500 kVA
Revision of C57.21-1990
|
|
|
|
| C57.91-1995 |
|
Active - IEEE guide for loading mineral-oil-immersed transformers
An Errata is available Reaffirmed 2002, 2004 An interpretation is available
|
|
|
|
| C57.91-1995/Cor 1-2002 |
|
Active - C57.91-1995/Cor 1-2002 IEEE guide for loading mineral-oil- immersed transformers corrigendum 1
|
|
|
|
| C57.94-1982 |
|
Active - IEEE recommended practice for installation, application, operation, and maintenance of dry-type general purpose distribution and power transformers
Reaffirmed 1987, 2000, 2006
|
|
|
|
| C57.96-1999 |
|
Active - IEEE guide for loading dry-type distribution and power transformers
|
|
|
|
| C57.100-1999 |
|
Active - IEEE standard test procedure for thermal evaluation of
liquid-immersed distribution and power transformers
|
|
|
|
| C57.105-1978 |
|
Active - IEEE guide for application of transformer connections in three-phase distribution systems
|
|
|
|
| C57.106-2006 |
|
Active - IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment
Revision of C57.106-2002
|
|
|
|
| C57.109-1993 |
|
Active - IEEE guide for liquid-immersed transformer through-fault-current duration
|
|
|
|
| C57.110-2008 |
|
Active - IEEE Recommended Practice for Establishing Liquid-Filled and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents
Revision of C57.110-1998
|
|
|
|
| C57.111-1989 |
|
Active - IEEE guide for acceptance of silicone insulating fluid and its
maintenance in transformers
Reaffirmed 1995, 2003, 2009 An interpretation is available
|
|
|
|
| C57.120-1991 |
|
Active - IEEE loss evaluation guide for power transformers and reactors
Reaffirmed 2000, 2006
|
|
|
|
| C57.121-1998 |
|
Active - IEEE guide for acceptance and maintenance of less flammable
hydrocarbon fluid in transformers
|
|
|
|
| C62.11-2005 |
|
Active - IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)
Revision of C62.11-1999
|
|
|
|
| C62.22-2009 |
|
Active - IEEE Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current Systems
|
|
|
|
| 1299/C62.22.1-1996 |
|
Active - IEEE guide for the connection of surge arresters to protect
insulated, shielded electric power cable systems
|
|
|
|
| C62.41.1-2002 |
|
Active - IEEE Std. C62.41.1 - 2002
|
|
|
|
| C62.41.2-2002 |
|
Active - IEEE recommended practice on characterization of surges in low-voltage (1000 V and less) AC power circuits
|
|
|
|
| C62.92.1-2000 |
|
Active - IEEE guide for the application of neutral grounding in electrical
utility systems - Part 1: introduction
|
|
|
|
| C62.92.3-1993 |
|
Active - IEEE guide for the neutral grounding in electrical utility systems, Part III-Generator Auxiliary Sys
|
|
|
|
| C62.92.4-1991 |
|
Active - IEEE guide for the application of neutral grounding in electrical
utility systems, part IV - distribution
|
|
|
|
| C62.92.5-1992 |
|
Active - IEEE guide for the application of neutral grounding in electrical
utility systems, part V - transmission systems and subtransmission
systems
|
|
|
|
| C62.92.5-2009 |
|
Active - IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part V¿Transmission Systems and Subtransmission Systems
|
|
|
|
| C63.4-2009 |
|
Active - American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
|
|
|
|
| Y32.9-1972 |
|
Active - American National Standard graphic symbols for electrical wiring and layout diagrams used in architecture and building construction
|
|
|
|