| 4a-2001 |
 |
Active - Amendment to IEEE standard techniques for high-voltage testing
|
|
|
|
| 7-4.3.2-2003 |
|
Active - IEEE standard criteria for digital computers in safety systems of nuclear power generating stations
Revision of 7-4.3.2-1993
|
|
|
|
| 18-2002 |
|
Active - IEEE Standard for Shunt Power Capacitors
Revision of 18-1992
|
|
|
|
| 43-2000 |
|
Active - IEEE recommended practice for testing insulation resistance of
rotating machinery
|
|
|
|
| 62.2-2004 |
|
Active - IEEE Std 62.2 - 2004 IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus
|
|
|
|
| P62.31/D4, Aug 2005 |
|
Active Draft - Draft Standard Test Methods for Low-Voltage Gas-Tube
|
|
|
|
| 80-2000 |
|
Active - IEEE guide for safety in AC substation grounding
|
|
|
|
| 81-1983 |
|
Active - IEEE guide for measuring earth resistivity, ground impedance, and earth surface potentials of a ground system
|
|
|
|
| 95-2002 |
|
Active - IEEE recommended practice for insulation testing of AC electric machinery (2300 V and above) with high direct voltage
Reaffirmed 2007 Revision of 95-1977
|
|
|
|
| 112-2004 |
|
Active - IEEE Standard Test Procedure for Polyphase Induction Motors and Generators
Revision of 112-1996
|
|
|
|
| 115-1995 |
|
Active - IEEE Guide: Test Procedures for Synchronous Machines
|
|
|
|
| 120-1989 |
|
Active - IEEE master test guide for electrical measurements in power
circuits
|
|
|
|
| 122-1991 |
|
Active - IEEE recommended practice for functional and performance
characteristics of control systems for steam turbine-generator
units
Reaffirmed 1997,2003
|
|
|
|
| 125-2007 |
|
Active - IEEE Recommended Practice for Preparation of Equipment Specifications for Speed-Governing of Hydraulic Turbines Intended to Drive Electric Generators
|
|
|
|
| 141-1993 (Red Book) |
|
Active - IEEE recommended practice for electric power distribution for industrial plants. (Color Book Series - Red Book)
An Errata is available Reaffirmed 1999
|
|
|
|
| 142-2007 (Green Book) |
|
Active - IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems. (Color Book Series - Green Book)
|
|
|
|
| 241-1990 (Gray Book) |
|
Active - IEEE recommended practice for electric power systems in commercial buildings. (Color Book Series - Gray Book)
|
|
|
|
| 242-2001 (Buff Book) |
|
Active - IEEE recommended practice for protection and coordination of industrial and commercial power systems. (Color Book Series - Buff Book)
An Errata is available
|
|
|
|
| 277-2007 |
|
Active - IEEE Recommended Practice for Cement Plant Power Distribution
Revision of 277-1994
|
|
|
|
| P277/D2 - Mar 2007 |
|
Active Approved Draft - Approved Draft IEEE Recommended Practice for Cement Plant Power Distribution
|
|
|
|
| P277/D2,Mar 2007 |
|
Active Unapproved Draft - Unapproved Draft IEEE Recommended Practice for Cement Plant Power Distribution
|
|
|
|
| 300-1988 |
|
Active - IEEE standard test procedures for semiconductor charged-particle
detectors
|
|
|
|
| 301-1988 |
|
Active - IEEE standard test procedures for amplifiers and preamplifiers used
with detectors of ionizing radiation
|
|
|
|
| 303-2004 |
|
Active - IEEE Std 303 - 2004 IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
Revision of 303-1991
|
|
|
|
| 308-2001 |
|
Active - Ieee Standard Criteria For Class 1E Power Systems For Nuclear Power Generating Stations
Reaffirmed 2007 Revision of 308-1991
|
|
|
|
| 315-1975 |
|
Active - Graphic Symbols for Electrical and Electronics Diagrams (Including Reference Designation Letters)
|
|
|
|
| 317-1983 |
|
Active - IEEE standard for electric penetration assemblies in containment structures for nuclear power generating stations
|
|
|
|
| 323-2003 |
|
Active - IEEE Std. 323 ™ IEEE standard for qualifying class 1E equipment for nuclear power generating stations
Reaffirmed 2008 Revision of 323-1983
|
|
|
|
| 325-1996 |
|
Active - IEEE standard test procedures for germanium gamma-ray detectors
|
|
|
|
| 334-2006 |
|
Active - IEEE Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations
|
|
|
|
| 336-2005 |
|
Active - IEEE Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities
Revision of 336-1985
|
|
|
|
| 338-2006 |
|
Active - IEEE Standard Crieteria for Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems
|
|
|
|
| P338/D4, Sep 2006 |
|
Active Unapproved Draft - Unapproved Draft Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems (ANSI/IEEE Std 338-2006 Revision of ANSI/IEEE Std 338-1987)
|
|
|
|
| 344-2004 |
|
Active - IEEE Std. 344 - 2004 IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations
Reaffirmed 2009 Revision of 344-1987
|
|
|
|
| 352-1987 |
|
Active - IEEE guide for general principles of reliability analysis of nuclear power generating station safety systems
|
|
|
|
| 367-1996 |
|
Active - IEEE recommended practice for determining the electric power
station ground potential rise and induced voltage from a power
fault
|
|
|
|
| 379-2000 |
|
Active - IEEE Standard Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety Systems
Reaffirmed 2008
|
|
|
|
| 382-2006 |
|
Active - IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations
|
|
|
|
| 383-2003 |
|
Active - IEEE standard for qualifying class 1E electric cables and field splices for nuclear power generating stations
Revision of 383-1974
|
|
|
|
| 384-2008 |
|
Active - IEEE Standard Criteria for Independence of Class 1E Equipment and Circuits
|
|
|
|
| 387-1995 |
|
Active - IEEE standard criteria for diesel-generator units applied as
standby power supplies for nuclear power generating stations
Reaffirmed 2001, 2007 An interpretation is available
|
|
|
|
| 393-1991 |
|
Active - IEEE standard for test procedures for magnetic cores
Reaffirmed 2007
|
|
|
|
| 398-1972 |
|
Active - IEEE standard test procedures for photomultipliers for scintillation counting and glossary for scintillation counting field
|
|
|
|
| 399-1997 (Brown Book) |
|
Active - IEEE recommended practice for industrial and commercial power systems analysis. (Color Book Series - Brown Book)
|
|
|
|
| 400-2001 |
|
Active - IEEE Guide for field testing and evaluation of the insulation of shielded power cable systems
Revision of 400-1991
|
|
|
|
| 400.2-2004 |
|
Active - IEEE guide for field testing of shielded power cable systems using very low frequency (VLF)
|
|
|
|
| 420-2001 |
|
Active - IEEE standard for the design and qualification of class 1E control boards, panels, and racks used in nuclear power generating stations
Revision of 420-1982
|
|
|
|
| 421.1-1986 |
|
Archived - IEEE standard definitions for excitation systems for synchronous machines
|
|
|
|
| 421.1-2007 |
|
Active - IEEE Standard Definitions for Excitation Systems for Synchronous Machines
|
|
|
|
| 421.2-1990 |
|
Active - IEEE guide for identification, testing, and evaluation of the
dynamic performance of excitation control systems
|
|
|
|
| 421.3-1997 |
|
Active - IEEE standard for high-potential test requirements for excitation
systems for synchronous machines
|
|
|
|
| 421.4-2004 |
|
Active - IEEE Std 421.4 - 2004 IEEE Guide for the Preparation of Excitation System Specifications
Revision of 421.4-1990
|
|
|
|
| 421.5-2005 |
|
Active - IEEE Std 421.5 - 2005 IEEE Recommended Practice for Excitation System Models for Power System Stability Studies
An interpretation is available Revision of 421.5-1992
|
|
|
|
| 446-1995 (Orange Book) |
|
Active - IEEE Recommended Practice For Emergency And Standby Power Systems For Industrial And Commercial Applications. (Color Book Series - Orange Book)
|
|
|
|
| 449-1998 |
|
Active - IEEE standard for ferroresonant voltage regulators
Reaffirmed 2007
|
|
|
|
| 450-2002 |
|
Active - IEEE recommended practice for maintenance, testing, and replacement of vented lead-acid batteries for stationary applications
An interpretation is available
|
|
|
|
| 463-2006 |
|
Active - IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
|
|
|
|
| 484-2002 |
|
Active - IEEE Recommended Practice for Installation Design And Installation of Vented Lead-Acid Batteries for Stationary Applications
Reaffirmed 2008 Revision of 484-1996
|
|
|
|
| 485-1997 |
|
Active - IEEE recommended practice for sizing lead-acid batteries for
stationary applications
Reaffirmed 2003 An interpretation is available
|
|
|
|
| P485/D5, May 2008 |
|
Active Unapproved Draft - IEEE Draft Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications
|
|
|
|
| 493-1997 (Gold Book) |
|
Archived - IEEE recommended practice for the design of reliable industrial and commercial power systems. (Color Book Series - Gold Book)
An interpretation is available Superseded by 493-2007 (Gold Book)
|
|
|
|
| 493-2007 (Gold Book) |
|
Active - IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems. (Color Book Series - Gold Book)
An Errata is available Revision of 493-1997 (Gold Book)
|
|
|
|
| P493/D4, Sep 2006 (Gold Book) |
|
Archived Approved Draft - IEEE Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems
|
|
|
|
| 497-2002 |
|
Active - IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
An Errata is available Revision of 497-1981
|
|
|
|
| 497-2002/Cor 1-2007 |
|
Active - IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations Corrigendum 1: Incorporation of User Feedback through 2005
Corrigendum to 497-2002
|
|
|
|
| 498-1985 |
|
Active - Ieee Standard Requirements For The Calibration And Control Of Measuring And Test Equipment Used In Nuclear Facilities
Superseded by 498-1990
|
|
|
|
| 499-1997 |
|
Active - IEEE recommended practice for cement plant electric drives and
related electrical equipment
|
|
|
|
| 502-1985 |
|
Active - IEEE guide for protection, interlocking, and control of fossil-fueled unit-connected steam stations
|
|
|
|
| 505-1977 |
|
Active - IEEE standard nomenclature for generating station electric power systems
|
|
|
|
| 515-2004 |
|
Active - IEEE standard for the testing, design, installation, and maintenance of electrical resistance heat tracing for industrial applications
Revision of 515-1997
|
|
|
|
| 515.1-2005 |
|
Active - IEEE Std 515.1 - 2005 IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Commercial Applications
Revision of 515.1-1995
|
|
|
|
| 519-1992 |
|
Active - IEEE recommended practices and requirements for harmonic control in
electrical power systems
An Errata is available
|
|
|
|
| 535-2006 |
|
Active - IEEE Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
An interpretation is available
|
|
|
|
| 551-2006 (Violet Book) |
|
Active - IEEE Recommended Practice for Calculating Short-Circuit Currents in Industrial and Commercial Power Systems. (Color Book Series - Violet Book)
|
|
|
|
| 572-2006 |
|
Active - IEEE Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations
|
|
|
|
| P572/D4, 2006 |
|
Active Unapproved Draft - Unapproved Draft Standard for Qualifcation of Class 1E Connection Assemblies for Nuclear Power Generating Stations
|
|
|
|
| 576-2000 |
|
Active - IEEE recommended practice for installation, termination, and
testing of insulated power cable as used in industrial and commerical
applications
|
|
|
|
| 577-2004 |
|
Active - IEEE Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Facilities
Revision of 577-1976
|
|
|
|
| 583-1982 |
|
Active - IEEE standard modular instrumentation and digital interface system (CAMAC)
|
|
|
|
| 595-1982 |
|
Active - IEEE standard serial highway interface system (CAMAC)
|
|
|
|
| 596-1982 |
|
Active - IEEE Standard Parallel Highway Interface System (CAMAC*)
|
|
|
|
| 602-1996 (White Book) |
|
Active - IEEE Recommended Practice for Electric Systems in Health Care Facilities. (Color Book Series - White Book)
|
|
|
|
| 602-2007 (White Book) |
|
Active - IEEE Recommended Practice for Electric Systems in Health Care Facilities. (Color Book Series - White Book)
|
|
|
|
| P602/D2, Sep 2006 (White Book) |
|
Active Unapproved Draft - Unapproved Draft Recommended Practice for Electric Systems in Health Care Facilities. (Color Book Series - White Book)
|
|
|
|
| 605-1998 |
|
Active - IEEE guide for design of substation rigid-bus structures
An Errata is available
|
|
|
|
| 622-1987 |
|
Active - IEEE recommended practice for the design and installation of electric heat tracing systems for nuclear power generating stations
|
|
|
|
| P627/D3, May 2008 |
|
Active Unapproved Draft - Draft Standard for Qualification of Equipment Used in Nuclear Facilities
|
|
|
|
| 628-2001 |
|
Active - IEEE Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nucler Power Generating Stations
Reaffirmed 2006
|
|
|
|
| 649-2006 |
|
Active - IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations
|
|
|
|
| 650-2006 |
|
Active - IEEE Standard for Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating Stations
Revision of 650-1990
|
|
|
|
| P650/D9. Feb 2006 |
|
Draft - Draft Standard for Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating Stations
|
|
|
|
| 665-1995 |
|
Active - IEEE guide for generating station grounding
|
|
|
|
| 666-2007 |
|
Active - IEEE Design Guide for Electric Power Service Systems for Generating Stations
|
|
|
|
| 675-1982 |
|
Active - IEEE standard multiple controllers in a CAMAC crate
|
|
|
|
| 683-1976 |
|
Active - IEEE recommended practice for block transfers in CAMAC systems
|
|
|
|
| 690-2004 |
|
Active - IEEE standard for the design and installation of cable systems for class 1E circuits in nuclear power generating stations
Revision of 690-1984
|
|
|
|
| 692-1997 |
|
Active - IEEE standard criteria for security systems for nuclear power
generating stations
|
|
|
|
| P692/D3, Oct 2008 |
|
Active Unapproved Draft - Draft Standard for Security Systems for Nuclear Power Generating Stations
|
|
|
|
| 726-1982 |
|
Active - IEEE standard real-time BASIC for CAMAC
|
|
|
|
| 739-1995 (Bronze Book) |
|
Active - IEEE Recommended Practice For Energy Management In Industrial And Commercial Facilities. (Color Book Series - Bronze Book)
|
|
|
|
| 741-2007 |
|
Active - IEEE Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations
|
|
|
|
| 758-1979 |
|
Active - IEEE standard subroutines for CAMAC
|
|
|
|
| 762-2006 |
|
Active - IEEE standard definitions for use in reporting electric generating unit reliability, availability, and productivity
|
|
|
|
| 765-2006 |
|
Active - IEEE Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)
|
|
|
|
| 810-1987 |
|
Active - IEEE standard for hydraulic turbine and generator integrally forged
shaft couplings and shaft runout tolerances
|
|
|
|
| 833-2005 |
|
Active - IEEE Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards
Revision of 833-1988
|
|
|
|
| 835-1994 |
|
Active - IEEE Std 835-1994 - IEEE Standard Power Cable Ampacity Tables
|
|
|
|
| 837-2002 |
|
Active - IEEE standard for qualifying permanent connections used in substation grounding
Revision of 837-1989
|
|
|
|
| 844-2000 |
|
Active - IEEE Recommended pratice for electrical impedance, induction, and skin effect heating of pipelines and vessels
An Errata is available
|
|
|
|
| 845-1999 |
|
Active - IEEE guide for the evaluation of human-system performance in
nuclear power generating stations
|
|
|
|
| 858-1993 |
|
Active - IEEE standard definitions in power operations terminology
|
|
|
|
| 859-1987 |
|
Active - IEEE standard terms for reporting and analyzing outage occurrences
and outage states of electrical transmission facilities
Reaffirmed 1993, 2002, 2008
|
|
|
|
| 902-1998 (Yellow Book) |
|
Active - IEEE guide for maintenance, operation, and safety of industrial and commercial power systems. (Color Book Series - Yellow Book)
|
|
|
|
| 928-1986 |
|
Active - IEEE recommended criteria for terrestrial photovoltaic power systems
|
|
|
|
| 933-1999 |
|
Active - IEEE guide for the definition of reliability program plans for
nuclear power generating stations
|
|
|
|
| 937-2007 |
|
Active - IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems
|
|
|
|
| P937/D7, Jan 2007 |
|
Active Approved Draft - Approved Draft Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems
|
|
|
|
| 946-2004 |
|
Active - IEEE Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Stations
Revision of 946-1992
|
|
|
|
| 958-2003 |
|
Active - IEEE Guide for the Application of AC Adjustable-Speed Drives on 2400 to 13 800 V Auxiliary Systems in Electric Power Generating Stations
|
|
|
|
| 960-1993 |
|
Active - 1. Introduction and general information
|
|
|
|
| 979-1994 |
|
Active - IEEE guide for substation fire protection
|
|
|
|
| 980-1994 |
|
Active - IEEE guide for containment and control of oil spills in substations
Reaffirmed 2001 An interpretation is available
|
|
|
|
| 1010-2006 |
|
Active - IEEE Guide for Control of Hydroelectric Power Plants
Revision of 1010-1987
|
|
|
|
| 1013-2000 |
|
Archived - IEEE recommended practice for sizing lead-acid batteries for
photovoltaic (PV) systems
|
|
|
|
| 1013-2007 |
|
Active - IEEE Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) Systems
|
|
|
|
| P1013/D10, Oct 2006 |
|
Active Approved Draft - Approved Draft Recommended Practice for Sizing Lead-Acid Batteries for Stand-Alone Photovoltaic (PV) Systems
|
|
|
|
| 1015-2006 (Blue Book) |
|
Active - IEEE Recommended Practice for Applying Low Voltage Circuit Breakers Used in Industrial and Commercial Power Systems. (Color Book Series - Blue Book)
|
|
|
|
| 1015-2006/Cor 1-2007 (Blue Book) |
|
Active - IEEE Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power Systems Corrigendum 1. (Color Book Series - Blue Book)
Supplement to 1015-2006 (Blue Book)
|
|
|
|
| 1017-2004 |
|
Active - IEEE Std 1017 - 2004 - IEEE Recommended Practice for Field Testing Electric Submersible Pump Cable
Revision of 1017-1991
|
|
|
|
| 1018-2004 |
|
Active - IEEE Std 1018 - 2004 - IEEE Recommended Practice for Specifying Electric Submersible Pump Cable-Ethylene-Propylene Rubber Insulation
Revision of 1018-1991
|
|
|
|
| 1019-2004 |
|
Active - IEEE Std 1019 - 2004 - IEEE Recommended Practice for Specifying Electric Submersible Pump Cable-Polypropylene Insulation
Revision of 1019-1991
|
|
|
|
| 1020-1988 |
|
Active - IEEE guide for control of small hydroelectric power plants
|
|
|
|
| 1023-2004 |
|
Active - IEEE Std. 1023 - 2004 IEEE Recommended Practice for the Application of Human Factors Engineering to Systems, Equipment, and Facilities of Nuclear Power Generating Stations and Other Nuclear Facilities
Revision of 1023-1988
|
|
|
|
| 1048-2003 |
|
Active - IEEE guide for protective grounding of power lines
Revision of 1048-1990
|
|
|
|
| 1050-2004 |
|
Active - IEEE Guide for Instrumentation and Control Equipment Grounding in Generating Stations
Revision of 1050-1996
|
|
|
|
| 1068-1996 |
|
Active - IEEE recommended practice for the repair and rewinding of motors
for the petroleum and chemical industry
|
|
|
|
| 1082-1997 |
|
Active - IEEE guide for incorporating human action reliability analysis for
nuclear power generating stations
|
|
|
|
| 1095-1989 |
|
Active - IEEE guide for installation of vertical generators and
generator/motors for hydroelectric applications
|
|
|
|
| 1100-2005 (Emerald Book) |
|
Active - IEEE Std 1100 - 2005 IEEE Recommended Practice for Powering and Grounding Electronic Equipment. (Color Book Series - Emerald Book)
Revision of 1100-1999 (Emerald Book)
|
|
|
|
| 1106-2005 |
|
Active - IEEE recommended practice for installation, maintenance, testing, and replacement of vented nickel-cadmium batteries for stationary applications
Revision of 1106-1995
|
|
|
|
| 1110-2002 |
|
Active - IEEE Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability Analyses
Reaffirmed 2007 Revision of 1110-1991
|
|
|
|
| 1115-2000 |
|
Active - IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for
Stationary Applications
|
|
|
|
| 1115a-2007 |
|
Active - IEEE Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications Amendment 1: Additional Discussion on Sizing Margins
|
|
|
|
| P1115a/D4, Feb 2007 |
|
Archived Approved Draft - Approved Draft Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications Amendment 1: Additional Discussion on Sizing Margins
|
|
|
|
| 1127-1998 |
|
Active - IEEE guide for the design, construction, and operation of electric
power substations for community acceptance and environmental
compatibility
|
|
|
|
| 1147-2005 |
|
Active - IEEE Guide for the Rehabilitation of Hydroelectric Power Plants
Revision of 1147-1991
|
|
|
|
| 1159.3-2003 |
|
Active - IEEE recommended practice for the transfer of power quality data
|
|
|
|
| 1160-1993 |
|
Active - IEEE standard test procedures for high-purity germanium crystals
for radiation detectors
|
|
|
|
| 1184-2006 |
|
Active - IEEE Guide for Batteries for Uninterruptible Power Supply Systems
|
|
|
|
| 1187-2002 |
|
Active - IEEE Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Storage Batteries for Stationary Applications
Revision of 1187-1996
|
|
|
|
| 1188-2005 |
|
Active - IEEE Recommended Practice for Maintenance, Testing, and Replacement of Valve-Regulated Lead- Acid (VRLA) Batteries for Stationary Applications
Revision of 1188-1996
|
|
|
|
| 1189-2007 |
|
Active - IEEE Guide for Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications
|
|
|
|
| 1205-2000 |
|
Active - IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects of Class 1E Equipment Used in Nuclear Power Generating Stations
Reaffirmed 2007
|
|
|
|
| 1205-2000/Cor 1-2006 |
|
Active - IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections
Corrigendum to 1205-2000 Reaffirmed 2007
|
|
|
|
| 1207-2004 |
|
Active - IEEE Guide for the Application of Turbine Governing Systems for Hydroelectric Generating Units
|
|
|
|
| 1214-1992 |
|
Active - IEEE standard multichannel analyzer (MCA) histogram data
interchange format for nuclear spectroscopy
|
|
|
|
| 1242-1999 |
|
Active - IEEE guide for specifying and selecting power, control, and
special-purpose cable for petroleum and chemical plants
|
|
|
|
| 1247-2005 |
|
Active - IEEE Std 1247 - 2006 IEEE Standard for Interrupter Switches for Alternating Current, Rated Above 1000 V
Revision of 1247-1998
|
|
|
|
| 1248-1998 |
|
Active - IEEE guide for the commissioning of electrical systems in
hydroelectric power plants
Reaffirmed 2007
|
|
|
|
| 1249-1996 |
|
Active - IEEE guide for computer-based control for hydroelectric power plant
automation
An Errata is available
|
|
|
|
| 1289-1998 |
|
Active - IEEE guide for the application of human factors engineering in the
design of computer-based monitoring and control displays for nuclear
power generating stations
|
|
|
|
| 1290-1996 |
|
Active - IEEE Guide for Motor Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations
Reaffirmed 2000 An interpretation is available
|
|
|
|
| 1291-1993 |
|
Active - IEEE guide for partial discharge measurement in power switchgear
An Errata is available Reaffirmed 1998, 2005
|
|
|
|
| 1313.1-1996 |
|
Active - IEEE standard for insulation coordination - definitions,
principles, and rules
Reaffirmed 2002
|
|
|
|
| 1313.2-1999 |
|
Active - IEEE guide for the application of insulation coordination
|
|
|
|
| 1325-1996 |
|
Active - IEEE recommended practice for reporting field failure data for
power circuit breakers
Reaffirmed 2002,2008
|
|
|
|
| 1346-1998 |
|
Active - IEEE recommended practice for evaluating electric power system
compatibility with electronic process equipment
|
|
|
|
| 1349-2001 |
|
Active - IEEE Guide for the Application of Electric Motors in Class I, Division 2 Hazardous (Classified) Locations
|
|
|
|
| 1361-2003 |
|
Active - IEEE guide for selection, charging, test, and evaluation of lead-acid batteries used in stand-alone photovoltaic (pv) systems
|
|
|
|
| 1374-1998 |
|
Active - IEEE guide for terrestrial photovoltaic power system safety
|
|
|
|
| 1375-1998 |
|
Active - IEEE guide for the protection of stationary battery systems
|
|
|
|
| 1458-2005 |
|
Active - IEEE Std. 1458 - 2005 - 1458 IEEE Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications
|
|
|
|
| 1491-2005 |
|
Active - IEEE Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications
An Errata is available
|
|
|
|
| P1491/D14, Dec 2004 |
|
Draft - Draft Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications
|
|
|
|
| 1526-2003 |
|
Active - IEEE recommended practice for testing the performance of stand-alone photovoltaic systems
|
|
|
|
| 1547-2003 |
|
Active - IEEE Standard for Interconnecting Distributed Resources with Electric Power Systems
Reaffirmed 2008
|
|
|
|
| 1547.1-2005 |
|
Active - IEEE Standard Conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems
|
|
|
|
| 1547.3-2007 |
|
Active - IEEE Guide for Monitoring, Information Exchange, and Control of Distributed Resources Interconnected with Electric Power Systems
|
|
|
|
| 1561-2007 |
|
Active - IEEE guide for optimizing the performance and life of lead-acid batteries in remote hybrid power systems
|
|
|
|
| 1562-2007 |
|
Active - IEEE Guide for Array and Battery Sizing in Stand-Alone Photovoltaic (PV) Systems
|
|
|
|
| P1562/D12, Aug 2007 |
|
Active Approved Draft - Draft Guide for Array and Battery Sizing in Stand-Alone Photovoltaic Systems
|
|
|
|
| 1566-2005 |
|
Active - IEEE Standard for Performance of Adjustable Speed AC Drives Rated 375 kW and Larger
|
|
|
|
| 1578-2007 |
|
Active - IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
|
|
|
|
| 1584-2002 |
|
Active - IEEE Guide for Performing Arc-Flash Hazard Calculations
An interpretation is available
|
|
|
|
| 1584a-2004 |
|
Active - IEEE Guide for Performing Arc-Flash Hazard Calculations - Amendment 1
Amendment to 1584-2002
|
|
|
|
| 1625-2008 |
|
Active - IEEE Standard for Rechargeable Batteries for Multi-Cell Mobile Computing Devices
Revision of 1625-2004
|
|
|
|
| 1660-2008 |
|
Active - IEEE guide for application and management of stationary batteries used in cycling service
|
|
|
|
| 1661-2007 |
|
Active - IEEE guide for test and evaluation of lead-acid batteries used in photovoltaic (PV) hybrid power systems
|
|
|
|
| P1679/D10, Nov 2008 |
|
Active Unapproved Draft - Draft Recommended Practice for the Characterization and Evaluation of Emerging Energy Storage Technologies in Stationary Applications
|
|
|
|
| 1725-2006 |
|
Active - IEEE Std 1725 - 2006 IEEE Standard for Rechargeable Batteries for Cellular Telephones
|
|
|
|
| 309-1999: ANSI N42.3-1999 |
|
Active - IEEE standard test procedures and bases for Geiger-Mueller counters
|
|
|
|
| IEC 62271-111 First edition 2005-11; IEEE C37.60 |
|
Active - High voltage switchgear and controlgear - Part 111: Overhead, pad-mounted, dry vault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV
Corrigendum to C37.60-2003
|
|
|
|
| C37-91-2000 |
|
Active - IEEE guide for protective relay applications to power transformers
|
|
|
|
| C37.04-1999 |
|
Active - IEEE standard rating structure for AC high-voltage circuit breakers
An Errata is available Reaffirmed 2006
|
|
|
|
| C37.04a-2003 |
|
Active - IEEE standard rating structure for AC high-voltage circuit breakers rated on a symmetrical current basis amendment 1: capacitance current switching
Reaffirmed 2006
|
|
|
|
| C37.06.1-2000 |
|
Active - American National Standard Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated -Definite Purpose for Fast Transient Recovery Voltage Rise Times
|
|
|
|
| C37.09-1999 |
|
Active - IEEE standard test procedure for AC high-voltage circuit breakers
rated on a symmetrical current basis
Reaffirmed 2007
|
|
|
|
| C37.09-1999/Cor 1-2007 |
|
Active - IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Corrigendum 1
Reaffirmed 2007
|
|
|
|
| C37.09a-2005 |
|
Active - IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Amendment 1: Capacitance Current Switching
Reaffirmed 2007
|
|
|
|
| C37.010-1999 |
|
Active - IEEE application guide for AC high-voltage circuit breakers rated
on a symmetrical current basis
Reaffirmed 2005
|
|
|
|
| C37.011-2005 |
|
Active - IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers
Revision of C37.011-1994
|
|
|
|
| C37.012-2005 |
|
Active - IEEE Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers
Revision of C37.012-1979
|
|
|
|
| C37.013-1997 |
|
Active - IEEE standard for AC high-voltage generator circuit breakers rated
on a symmetrical current basis
Reaffirmed 2008
|
|
|
|
| PC37.013a/D6 |
|
Active Unapproved Draft - Unapproved Draft IEEE Standard for AC High Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis Amendment 1: Supplement for use with Generators Rated 10-100 MVA
|
|
|
|
| C37.015-1993 |
|
Active - IEEE application guide for shunt reactor switching.
Reaffirmed 2000, 2006
|
|
|
|
| PC37.016/D7, Aug 2006 |
|
Active Unapproved Draft - Unapproved Draft IEEE Standard for AC High-Voltage Circuit Switchers rated 15 kV through 245 kV
|
|
|
|
| C37.081-1981 |
|
Active - IEEE guide for synthetic fault testing of AC high-voltage circuit breakers rated on a symmetrical current basis
Reaffirmed 1988, 2007
|
|
|
|
| C37.081a-1997 |
|
Active - Supplement to IEEE guide for synthetic fault testing of AC
high-voltage circuit breakers rated on a symmetrical current basis.
8.3.2: recovery voltage for terminal faults; asymmetrical short-circuit
current
Reaffirmed 2007
|
|
|
|
| C37.082-1982 |
|
Active - IEEE standard methods for the measurement of sound pressure levels of AC power circuit breakers
|
|
|
|
| C37.083-1999 |
|
Active - IEEE guide for synthetic capacitive current switching tests of AC
high-voltage circuit breakers
Reaffirmed 2007
|
|
|
|
| C37.10-1995 |
|
Active - IEEE guide for diagnostics and failure investigation of power
circuit breakers
Reaffirmed 2002,2008
|
|
|
|
| C37.10.1-2000 |
|
Active - IEEE guide for the selection of monitoring for circuit breakers
|
|
|
|
| C37.11-1997 |
|
Active - IEEE standard requirements for electrical control for AC
high-voltage circuit breakers rated on a symmetrical current basis
|
|
|
|
| C37.12.1-2007 |
|
Active - IEEE Guide for High-Voltage (>1000 V) Circuit Breaker Instruction Manual Content
|
|
|
|
| C37.13.1-2006 |
|
Active - IEEE Standard for Definite-Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
|
|
|
|
| C37.013a-2007 |
|
Active - IEEE Standard for AC High Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis - Amendment 1: Supplement for Use with Generators Rated 10-100 MVA
|
|
|
|
| C37.14-2002 |
|
Active - IEEE standard for low-voltage DC power circuit breakers used in enclosures
Reaffirmed 2008 Revision of C37.14-1999
|
|
|
|
| C37.16-2000 |
|
Active - American National Standard Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors- Preferred Ratings, Related Requirements, and Application Recommendations
|
|
|
|
| C37.016-2006 |
|
Active - IEEE Standard for AC High-Voltage Circuit Switcher rated 15.5 kV through 245 kV
|
|
|
|
| C37.17-1997 |
|
Active - American National Standard for Trip Devices for AC and General Purpose DC Low Voltage Power Circuit Breakers
|
|
|
|
| PC37.17/D6, Oct 2008 |
|
Active Unapproved Draft - IEEE Draft Standard for Trip Systems for Low-Voltage (up to 635 V) AC and General Purpose Low- Voltage (up to 600 V) DC Power Circuit Breakers
|
|
|
|
| C37.18-1979 |
|
Active - IEEE Standard Field Discharge Circuit Breakers For Rotating Electric Machinery
|
|
|
|
| C37.20.1-2002 |
|
Active - IEEE standard for metal-enclosed low-voltage power circuit breaker switchgear
Reaffirmed 2007 Revision of C37.20.1-1993
|
|
|
|
| C37.20.1a-2005 |
|
Active - IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear Amendment 1: Short-Time and Short-Circuit Withstand Current Tests- Minimum Areas for Multiple Cable Connections
Reaffirmed 2007
|
|
|
|
| C37.20.1b-2006 |
|
Active - IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear Amendment 2: Additional Requirements for Control and Auxiliary Power Wiring in DC Traction Power Switchgear
Reaffirmed 2007
|
|
|
|
| C37.20.2-1999 |
|
Active - IEEE Standard for Metal-Clad Switchgear
|
|
|
|
| C37.20.3-2001 |
|
Active - IEEE standard for metal-enclosed interrupter switchgear
|
|
|
|
| C37.20.4-2001 |
|
Active - IEEE standard for indoor AC switches (1kV-38kV) for use in
metal-enclosed switchgear
|
|
|
|
| C37.20.6-2007 |
|
Active - IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures
|
|
|
|
| C37.20.7 2007 |
|
Active - IEEE guide for testing metal-enclosed switchgear rated up to 38 kV for internal arcing faults
|
|
|
|
| C37.21-2005 |
|
Active - IEEE Standard for Control Switchboards
Revision of C37.21-1985
|
|
|
|
| C37.22-1997 |
|
Active - American National Standard Preferred Ratings and Related Required Capabilities for Indoor AC Medium-Voltage Switches Used in Metal-Enclosed Switchgear
|
|
|
|
| C37.23-2003 |
|
Active - IEEE Std C37.23 - 2003 IEEE Standard for Metal-Enclosed Bus
Revision of C37.23-1987
|
|
|
|
| C37.24-2003 |
|
Active - IEEE guide for evaluating the effect of solar radiation on outdoor metal-enclosed switchgear
Revision of C37.24-1986
|
|
|
|
| C37.26-2003 |
|
Active - IEEE guide for methods of power factor measurement for low-voltage inductive test circuits
Reaffirmed 2009
|
|
|
|
| C37.30-1997 |
|
Active - IEEE standard requirements for high-voltage switches
|
|
|
|
| C37.32-2002 |
|
Active - American National Standard for High Voltage Switches, Bus Supports, and Accessories--Schedules of Preferred Ratings, Construction Guidelines, and Specifications
|
|
|
|
| C37.34-1994 |
|
Active - IEEE standard test code for high-voltage air switches
|
|
|
|
| C37.35-1995 |
|
Active - IEEE guide for the application, installation, operation, and
maintenance of high-voltage air disconnecting and interrupter switches
|
|
|
|
| C37.36b-1990 |
|
Active - IEEE guide to current interruption with horn-gap air switches
|
|
|
|
| C37.37-1996 |
|
Active - IEEE Loading Guide for AC High-Voltage Air Switches (in Excess of 1000 V)
|
|
|
|
| C37.40-2003 |
|
Active - IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
Reaffirmed 2009 Revision of C37.40-1993
|
|
|
|
| C37.42-1996 |
|
Active - American National Standard Specification for High-Voltage Expulsion Type Distribution Class Fuses, Cutouts, Fuse Disconnecting Switches and Fuse Links
|
|
|
|
| C37.43-2008 |
|
Active - IEEE Standard Specifications for High-Voltage Expulsion, Current-Limiting, and Combination-Type Distribution and Power Class External Fuses, with Rated Voltages from 1 kV through 38 kV, Used for the Protection of Shunt Capacitors
|
|
|
|
| PC37.43/D10, Oct 2007 |
|
Active Unapproved Draft - IEEE Draft Standard Specifications for High-Voltage Expulsion, Current-Limiting and Combination Type Distribution and Power Class External Fuses, With Rated Voltages from 1 kV through 38 kV, Used for the Protection of Shunt Capacitors
|
|
|
|
| PC37.43/D11, Apr 2008 |
|
Active Unapproved Draft - Draft Standard Specifications for High-Voltage Expulsion, Current-Limiting and Combination Type Distribution and Power Class External Fuses, With Rated Voltages from 1 kV through 38 kV, Used for the Protection of Shunt Capacitors
|
|
|
|
| C37.45-2007 |
|
Active - IEEE Standard Specifications for High-Voltage Distribution Class Enclosed Single-Pole Air Switches with Rated Voltages from 1 kV through 8.3 kV
|
|
|
|
| C37.46-2000 |
|
Active - American National Standard for For High Voltage Expulsion and Current-Limiting Type Power Class Fuses and Fuse Disconnecting Switches
Revision of C37.46-1981
|
|
|
|
| C37.47-2000 |
|
Active - American National Standard for High Voltage Current-Limiting Type Distribution Class Fuses and Fuse Disconnecting Switches
|
|
|
|
| C37.48-2005 |
|
Active - IEEE Std C37.48 - 2005 IEEE Guide for Application, Operation, and Maintenance of High-Voltage Fuses, Destribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
Revision of C37.48-1997
|
|
|
|
| C37.48.1-2002 |
|
Active - IEEE Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses with Rated Voltages 1-38 kV
Reaffirmed 2008
|
|
|
|
| C37.50-1989 |
|
Active - American National Standard for Switchgear--Low-Voltage AC Power Circuit Breakers Used in Enclosures--Test Procedures
|
|
|
|
| C37.51-1989 |
|
Active - American National Standard for Switchgear--Metal-Enclosed Low-Voltage AC Power- Circuit-Breaker Switchgear Assemblies--Conformance Test Procedures
|
|
|
|
| C37.52-1974 |
|
Active - American National Standard Test Procedures for Low-Voltage AC Power Circuit Protectors Used in Enclosures
|
|
|
|
| C37.53.1-1989 |
|
Active - American National Standard High-Voltage Current-Limiting Motor-Starter Fuses - Conference Test Procedures
|
|
|
|
| C37.59-2007 |
|
Active - IEEE Standard Requirements for Conversion of Power Switchgear Equipment
Revision of C37.59-2002
|
|
|
|
| C37.60-2003 |
|
Active - IEEE Standard Requirements for Overhead, Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV
|
|
|
|
| PC37.60/D04, Jun, 2008 |
|
Active Unapproved Draft - Draft Standard for Overhead, Pad mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV
|
|
|
|
| C37.63-2005 |
|
Active - IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for AC Systems
|
|
|
|
| C37.66-2005 |
|
Active - IEEE Standard Requirements for Capacitor Switches for AC Systems (1 kV to 38 kV)
|
|
|
|
| C37.74-2003 |
|
Active - IEEE standard requirements for subsurface, vault, and pad-mounted load-interrupter switchgear and fused load-interrupter switchgear for alternating current systems up to 38 kV
|
|
|
|
| C37.81-1989 |
|
Active - IEEE guide for seismic qualification of class 1E metal-enclosed
power switchgear assemblies
|
|
|
|
| C37.82-1987 |
|
Active - IEEE standard for the qualification of switchgear assemblies for class 1E applications in nuclear power generating stations
|
|
|
|
| C37.85-1989 |
|
Active - American National Standard for Switchgear--Alternating-Current High-Voltage Power Vacuum Interrupters-Safety Requirements for X-radiation Limits
|
|
|
|
| C37.90.1-2002 |
|
Active - C37.90.1 IEEE Standard for Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus
Revision of C37.90.1-1989
|
|
|
|
| C37.90.2-2004 |
|
Active - IEEE Standard for Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers
Revision of C37.90.2-1995
|
|
|
|
| C37.90.3-2001 |
|
Active - IEEE standard electrostatic discharge tests for protective relays
Reaffirmed 2006
|
|
|
|
| C37.96-2000 |
|
Active - IEEE Guide for AC Motor Protection
Reaffirmed 2006
|
|
|
|
| C37.99-2000 |
|
Active - IEEE guide for the protection of shunt capacitor banks
Revision of C37.99-1990
|
|
|
|
| C37.100-1992 |
|
Active - IEEE standard definitions for power switchgear
|
|
|
|
| C37.100.1-2007 |
|
Active - IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V
|
|
|
|
| C37.103-2004 |
|
Active - IEEE Std C37.103 - 2004 IEEE Guide for Differential and Polarizing Relay Circuit Testing
Revision of C37.103-1990
|
|
|
|
| C37.121-1989 |
|
Active - American National Standard for Switchgear- Unit Substations- Requirements
|
|
|
|
| C50.13-2005 |
|
Active - IEEE Std C50.13 - 2005 IEEE standard for cylindrical-rotor 50 Hz and 60 Hz synchronous generators rated 10 MVA and above
|
|
|
|
| C57.12.00-2000 |
|
Archived - IEEE standard general requirements for liquid-immersed distribution, power, and regulating transformers
|
|
|
|
| C57.12.10-1997 |
|
Active - American National Standard for Transformers- 230 kV and Below 833 / 958 through 8333 / 10 417 kVA, Single-Phase, and 750 / 862 through 60 000 / 80 000 / 100 000 kVA, Three-Phase Without Load Tap Changing; and 3750 / 4687 through 60 000 / 80 000 / 100 000 kVA with Load Tap Changing- Safety Requirement
An interpretation is available
|
|
|
|
| C57.12.21-1992 |
|
Active - American National Standard Requirements for Pad-Mounted, Compartmental-Type Self-Cooled, Single-Phase Distribution Transformers With High Voltage Bushings; High-Voltage, 34500 GRYD/19920 Volts and Below; Low-Voltage, 240/120 Volts; 167 kVA and Smaller
|
|
|
|
| C57.12.25-1990 |
|
Active - American National Standard for Transformers - Pad-mounted, Compartmental-type, Self-cooled, Single-phase Distribution Transformers with Separable Insulated High-voltage Connectors; High Voltage, 34 500 Grdy/ 19 920 Volts and Below; Low Voltage, 240/120 Volts; 167 Kva and Smaller Requirements
|
|
|
|
| C57.12.26-1992 |
|
Active - IEEE Standard for Pad-mounted, Compartmental-Type, Self-cooled, Three-phase Distribution Transformers for Use with Separable Insulated High-voltage Connectors (34 500 Grd Y/19 920 V and Below, 2500 Kva and Smaller)
|
|
|
|
| C57.12.40-2000 |
|
Archived - American National Standard for Secondary Network Transformers Subway and Vault Types (Liquid Immersed)-Requirements
|
|
|
|
| C57.12.40-2006 |
|
Active - IEEE Standard Requirements for Secondary Network Transformers, Subway and Vault Types (Liquid Immersed)
|
|
|
|
| C57.12.52-1981 |
|
Active - American National Standard Requirements for Sealed Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts
|
|
|
|
| C57.12.55-1987 |
|
Active - American National Standard for Transformers - Used in Unit Installations, Including Unit Substations-Conformance Standard
|
|
|
|
| C57.12.59-2001 |
|
Active - IEEE guide for dry-type transformer through-fault current duration
Reaffirmed 2006
|
|
|
|
| C57.12.80-2002 |
|
Active - IEEE standard terminology for power and distribution transformers
Revision of C57.12.80-1978
|
|
|
|
| C57.12.91-2001 |
|
Active - IEEE standard test code for dry-type distribution and power
transformers
An interpretation is available
|
|
|
|
| C57.13.2-2005 |
|
Active - IEEE Std. C57.13.2 - 2005 IEEE Standard Conformance Test Procedure for Instrument Transformers
|
|
|
|
| C57.91-1995 |
|
Active - IEEE guide for loading mineral-oil-immersed transformers
An Errata is available Reaffirmed 2002, 2004 An interpretation is available
|
|
|
|
| C57.91-1995/Cor 1-2002 |
|
Active - C57.91-1995/Cor 1-2002 IEEE guide for loading mineral-oil- immersed transformers corrigendum 1
|
|
|
|
| C57.94-1982 |
|
Active - IEEE recommended practice for installation, application, operation, and maintenance of dry-type general purpose distribution and power transformers
Reaffirmed 1987, 2000, 2006
|
|
|
|
| C57.96-1999 |
|
Active - IEEE guide for loading dry-type distribution and power transformers
|
|
|
|
| C57.100-1999 |
|
Active - IEEE standard test procedure for thermal evaluation of
liquid-immersed distribution and power transformers
|
|
|
|
| C57.104-2008 |
|
Active - IEEE guide for the interpretation of gases generated in oil-immersed transformers
|
|
|
|
| C57.109-1993 |
|
Active - IEEE guide for liquid-immersed transformer through-fault-current duration
|
|
|
|
| C57.111-1989 |
|
Active - IEEE guide for acceptance of silicone insulating fluid and its
maintenance in transformers
Reaffirmed 1995, 2003, 2009 An interpretation is available
|
|
|
|
| C57.121-1998 |
|
Active - IEEE guide for acceptance and maintenance of less flammable
hydrocarbon fluid in transformers
|
|
|
|
| C62.1-1989 |
|
Active - IEEE standard for gapped silicon-carbide surge arresters for AC
power circuits
|
|
|
|
| C62.2-1987 |
|
Active - IEEE guide for the application of gapped silicon-carbide surge
arresters for alternating current systems
|
|
|
|
| C62.11-2005 |
|
Active - IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)
Revision of C62.11-1999
|
|
|
|
| C62.11a-2008 |
|
Active - IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)
|
|
|
|
| C62.21-2003 |
|
Active - IEEE Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 V and Greater
An Errata is available Reaffirmed 2009
|
|
|
|
| C62.21-2003/Cor 1-2008 |
|
Active - IEEE Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 V and Greater Corrigendum 1: Replace Table 2, A.1, and A.2
Supplement to C62.21-2003
|
|
|
|
| 1299/C62.22.1-1996 |
|
Active - IEEE guide for the connection of surge arresters to protect
insulated, shielded electric power cable systems
|
|
|
|
| C62.23-1995 |
|
Active - IEEE application guide for surge protection of electric generating
plants
|
|
|
|
| C62.31-2006 |
|
Active - IEEE Standard Test Methods for Low-Voltage Gas-Tube Surge-Protective Device Components
Revision of C62.31-1987
|
|
|
|
| C62.32-2004 |
|
Active - IEEE Standard Test Methods for Low-Voltage Air Gap Surge-Protective Device Components (Excluding Valve and Expulsion Types)
Revision of C62.32-1981
|
|
|
|
| C62.33-1982 |
|
Active - IEEE standard test specifications for varistor surge-protective devices
|
|
|
|
| C62.34-1996 |
|
Active - IEEE Standard For Performance Of Low-voltage Surge-protective Devices (secondary arresters)
|
|
|
|
| C62.35-1987 |
|
Active - IEEE standard test specifications for avalanche junction
semiconductor surge protective devices
|
|
|
|
| PC62.35/D11, Aug 2007 |
|
Active Unapproved Draft - Draft Standard Test Specifications for Avalanche Junction Semiconductor Surge-Protective Devices
|
|
|
|
| C62.36-2000 |
|
Active - IEEE standard test methods for surge protectors used in low-voltage data, communications, and signaling circuits
|
|
|
|
| C62.37-1996 |
|
Active - IEEE standard test specification for thyristor diode surge
protective devices
|
|
|
|
| C62.37.1-2000 |
|
Active - IEEE guide for the application of thyristor surge protective
devices
|
|
|
|
| C62.38-1994 |
|
Active - IEEE guide on electrostatic discharge (ESD): ESD withstand
capability evaluation methods (for electronic equipment subassemblies)
|
|
|
|
| C62.41-1991 |
|
Active - IEEE recommended practice on surge voltages in low-voltage AC power
circuits
|
|
|
|
| C62.41.1-2002 |
|
Active - IEEE Std. C62.41.1 - 2002
|
|
|
|
| C62.41.2-2002 |
|
Active - IEEE recommended practice on characterization of surges in low-voltage (1000 V and less) AC power circuits
|
|
|
|
| C62.42-2005 |
|
Active - IEEE Guide for the Application of Component Surge-Protective Devices for Use in Low-Voltage [Equal to or Less than 1000 V (ac) or 1200 V (dc)] Circuits
Revision of C62.42-1992
|
|
|
|
| C62.43-2004 |
|
Active - IEEE guide for the application of surge protectors used in low-voltage (equal to or less than 1000 V, rms, or 1200 V, DC) data, communications, and signaling circuits
|
|
|
|
| C62.45-2002 |
|
Active - IEEE Std. C62.45 - 2002
Reaffirmed 2008 Revision of C62.45-1992
|
|
|
|
| C62.48-2005 |
|
Active - IEEE Guide on Interactions Between Power System Disturbances and Surge-Protective Devices
Revision of C62.48-1995
|
|
|
|
| C62.62-2000 |
|
Active - IEEE standard test specifications for surge-protective devices for
low-voltage AC power circuits
|
|
|
|
| C62.64-1997 |
|
Active - IEEE standard specifications for surge protectors used in
low-voltage data, communications, and signaling circuits
|
|
|
|
| C62.72-2007 |
|
Active - IEEE Guide for the Application of Surge-Protective Devices for Low-Voltage (1000 V or Less) AC Power Circuits
|
|
|
|
| PC62.82.1/D2, Aug 2008 |
|
Active Unapproved Draft - IEEE Draft Standard for Insulation Coordinatio--Definitions, Principles, and Rules
|
|
|
|
| C62.92-1989 |
|
Active - IEEE guide for the application of neutral grounding in electrical
utility systems. Part II - grounding of synchronous generator systems
|
|
|
|
| C62.92.1-2000 |
|
Active - IEEE guide for the application of neutral grounding in electrical
utility systems - Part 1: introduction
|
|
|
|
| C62.92.2-1989 |
|
Active - IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II-Grounding of Synchronous Generator Systems
|
|
|
|
| C62.92.3-1993 |
|
Active - IEEE guide for the neutral grounding in electrical utility systems, Part III-Generator Auxiliary Sys
|
|
|
|
| C62.92.4-1991 |
|
Active - IEEE guide for the application of neutral grounding in electrical
utility systems, part IV - distribution
|
|
|
|
| C62.92.5-1992 |
|
Active - IEEE guide for the application of neutral grounding in electrical
utility systems, part V - transmission systems and subtransmission
systems
|
|
|
|
| C67.92-1987 |
|
Active - IEEE Guide For The Application Of Neutral Grounding In Electrical Utility Systems Part I-introduction
|
|
|
|
| C93.1-1999 |
|
Active - American National Standard Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT)
|
|
|
|
| N42.5-1965 |
|
Active - American National Standard Bases For GM Counter Tubes
|
|
|
|
| N42.6-1980 |
|
Active - American National Standard interrelationship of quartz-fiber electrometer type exposure meters and companion exposure meter chargers
|
|
|
|
| N42.12-1994 |
|
Active - American National Standard calibration and usage of
thallium-activated sodium iodide detector systems for assay of
radionuclides
|
|
|
|
| N42.15-1997 |
|
Active - American National Standard check sources for and verification of
liquid-scintillation counting systems
|
|
|
|
| N42.17A-2003 |
|
Active - American national standard for performance specifications for health physics instrumentation-portable instrumentation for use in normal environmental conditions
Revision of N42.17A-1989
|
|
|
|
| N42.17B-1989 |
|
Active - American National Standard performance specifications for health
physics instrumentation. Occupational airborne radioactivity monitoring
instrumentation
Reaffirmed 1994
|
|
|
|
| N42.17C-1989 |
|
Active - American National Standard performance specifications for health
physics instrumentation. Portable instrumentation for use in extreme
environmental conditions
Reaffirmed 1994,2009
|
|
|
|
| N42.18-2004 |
|
Active - American National Standard Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents
|
|
|
|
| N42.20-2003 |
|
Active - American National Standard Performance Criteria for Active Personnel Radiation Monitors
Revision of N42.20-1995
|
|
|
|
| N42.22-1995 |
|
Active - American National Standard - traceability of radioactive sources to
the National Institute of Standards and Technology (NIST) and Associated
Instrument Quality Control
|
|
|
|
| N42.23-1996 |
|
Active - American National Standard measurement and associated instrument
quality assurance for radioassay laboratories
|
|
|
|
| N42.25-1997 |
|
Active - American National Standard calibration and usage of alpha/beta
proportional counters
|
|
|
|
| N42.27-1999 |
|
Active - American National Standard for determination of uniformity of solid
gamma-emitting flood sources
|
|
|
|
| N42.28-2002 |
|
Active - American National Standard for calibration of germanium detectors for in-situ gamma-ray measurements
|
|
|
|
| N42.30-2002 |
|
Active - American national standard for performance specification for tritium monitors
|
|
|
|
| N42.31-2003 |
|
Active - American National Standard for measurement procedures for resolution and efficiency of wide-bandgap semiconductor detectors of ionizing radiation
|
|
|
|
| N42.32-2003 |
|
Archived - American National Standard Performance Criteria for Alarming Personal Radiation Detectors for Homeland Security
|
|
|
|
| N42.32-2006 |
|
Active - American National Standard Performance Criteria for Alarming Personal Radiation Detectors for Homeland Security
|
|
|
|
| N42.33-2003 |
|
Archived - American National Standard for Portable Radiation Detection Instrumentation for Homeland Security
|
|
|
|
| N42.33-2006 |
|
Active - American National Standard for Portable Radiation Detection Instrumentation for Homeland Security
|
|
|
|
| N42.34-2003 |
|
Archived - American National Standard Performance Criteria for Hand-held Instruments for the Detection and Identification of Radionuclides
|
|
|
|
| N42.34-2006 |
|
Active - American National Standard Performance Criteria for Hand-Held Instruments for the Detection and Identification of Radionuclides
|
|
|
|
| N42.35-2004 |
|
Archived - ANSI N42.35-2004 - American National Standard for Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security
|
|
|
|
| N42.35-2006 |
|
Active - American National Standard for Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security
|
|
|
|
| ANSI N42.37-2006 |
|
Active - American National Standard for Training Requirements for Homeland Security Purposes Using Radiation Detection Instrumentation for Interdiction and Prevention
|
|
|
|
| N42.38-2006 |
|
Active - American National Standard Performance Criteria for Spectroscopy-Based Portal Monitors Used for Homeland Security
|
|
|
|
| N42.41-2007 |
|
Active - American National Standard Minimum Performance Criteria for Active Interrogation Systems Used for Homeland Security
|
|
|
|
| ANSI N42.42-2006 |
|
Active - American National Standard Data Format Standard for Radiation Detectors Used for Homeland Security
|
|
|
|
| N42.43-2006 |
|
Active - ANSI N42.43-2006
|
|
|
|
| N42.46-2008 |
|
Active - American National Standard for Determination of the Imaging Performance of X-Ray and Gamma-Ray Systems for Cargo and Vehicle Security Screening
|
|
|
|
| N42.48-2008 |
|
Active - American National Standard Performance Requirements for Spectroscopic Personal Radiation Detectors (SPRDs) for Homeland Security
|
|
|
|
| N317-1980 |
|
Active - American National Standard performance criteria for instrumentation used for inplant plutonium monitoring
|
|
|
|
| N320-1979 |
|
Active - American National Standards performance specifications for reactor emergency radiological monitoring instrumentation
|
|
|
|
| N322-1997 |
|
Active - American National Standard inspection, test, construction, and
performance requirements for direct reading electrostatic/electroscope
type dosimeters
|
|
|
|
| N323-1978 |
|
Active - American National Standard radiation protection instrumentation test and calibration
|
|
|
|
| N323A-1997 |
|
Active - American National Standard radiation protection instrumentation
test and calibration, portable survey instruments
An Errata is available
|
|
|
|
| N323B-2003 |
|
Active - American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instrumentation for Near Background Operation
|
|
|
|
| N323D-2002 |
|
Active - N323D American National Standard For Installed Radiation Protection Instrumentation
|
|
|
|
| N449.1-1978 |
|
Active - American National Standard Procedures For Periodic Inspection Of Cobalt-60 And Cesium-137 Teletherapy Equipment
|
|
|
|