| 1-2000 |
 |
Active - IEEE recommended practice - general principles for temperature
limits in the rating of electrical equipment and for the evaluation of
electrical insulation
Reaffirmed 2005 Revision of 4-1995
|
|
|
|
| 4-1995 |
|
Active - IEEE Std 4-1995 (revision Of IEEE Std 4-1 978) IEEE Standard Techniques For High-voltage Testing
|
|
|
|
| 4a-2001 |
|
Active - Amendment to IEEE standard techniques for high-voltage testing
|
|
|
|
| 18-2002 |
|
Active - IEEE Standard for Shunt Power Capacitors
Revision of 18-1992
|
|
|
|
| 32-1972 |
|
Active - IEEE standard requirements, terminology, and test procedure for neutral grounding devices
Reaffirmed 1997
|
|
|
|
| 43-2000 |
|
Active - IEEE recommended practice for testing insulation resistance of
rotating machinery
|
|
|
|
| 62-1995 |
|
Active - IEEE guide for diagnostic field testing of electric power apparatus
- part 1: oil filled power transformers, regulators, and reactors
|
|
|
|
| 62.2-2004 |
|
Active - IEEE Std 62.2 - 2004 IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus
|
|
|
|
| 80-2000 |
|
Active - IEEE guide for safety in AC substation grounding
|
|
|
|
| 81-1983 |
|
Active - IEEE guide for measuring earth resistivity, ground impedance, and earth surface potentials of a ground system
|
|
|
|
| 95-2002 |
|
Active - IEEE recommended practice for insulation testing of AC electric machinery (2300 V and above) with high direct voltage
Reaffirmed 2007 Revision of 95-1977
|
|
|
|
| 111-2000 |
|
Active - IEEE standard for wide-band (greater than 1 decade) transformers
Reaffirmed 2007
|
|
|
|
| 112-2004 |
|
Active - IEEE Standard Test Procedure for Polyphase Induction Motors and Generators
Revision of 112-1996
|
|
|
|
| 115-1995 |
|
Active - IEEE Guide: Test Procedures for Synchronous Machines
|
|
|
|
| 120-1989 |
|
Active - IEEE master test guide for electrical measurements in power
circuits
|
|
|
|
| 141-1993 (Red Book) |
|
Active - IEEE recommended practice for electric power distribution for industrial plants. (Color Book Series - Red Book)
An Errata is available Reaffirmed 1999
|
|
|
|
| 181-2003 |
|
Active - IEEE standard on transitions, pulses, and related waveforms
|
|
|
|
| 241-1990 (Gray Book) |
|
Active - IEEE recommended practice for electric power systems in commercial buildings. (Color Book Series - Gray Book)
|
|
|
|
| 242-2001 (Buff Book) |
|
Active - IEEE recommended practice for protection and coordination of industrial and commercial power systems. (Color Book Series - Buff Book)
An Errata is available
|
|
|
|
| 259-1999 |
|
Active - IEEE standard test procedure for evaluation of systems of
insulation for dry-type specialty and general-purpose transformers
|
|
|
|
| 260.1-2004 |
|
Active - IEEE Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
Revision of 260.1-1993
|
|
|
|
| 260.3-1993 |
|
Active - American National Standard mathematical signs and symbols for use in physical sciences and technolog
|
|
|
|
| 260.4-1996 |
|
Active - American National Standard letter symbols and abbreviations for
quantities used in acoustics
Reaffirmed 2002, 2004
|
|
|
|
| 270-2006 |
|
Active - IEEE Standard Definitions for Selected Quantities, Units, and Related Terms, with Special Attention to the International System of Units (SI)
|
|
|
|
| 287-2007 |
|
Active - IEEE Standard for Precision Coaxial Connectors (DC to 110 GHz)
|
|
|
|
| 295-1969 |
|
Active - IEEE standard for electronics power transformers
Reaffirmed 2000, 2007
|
|
|
|
| 315-1975 |
|
Active - Graphic Symbols for Electrical and Electronics Diagrams (Including Reference Designation Letters)
|
|
|
|
| 367-1996 |
|
Active - IEEE recommended practice for determining the electric power
station ground potential rise and induced voltage from a power
fault
|
|
|
|
| 387-1995 |
|
Active - IEEE standard criteria for diesel-generator units applied as
standby power supplies for nuclear power generating stations
Reaffirmed 2001, 2007 An interpretation is available
|
|
|
|
| 388-1992 |
|
Active - IEEE standard for transformers and inductors in electronic power
conversion equipment
Reaffirmed 2007
|
|
|
|
| 389-1996 |
|
Active - IEEE recommended practice for testing electronics transformers and
inductors
Reaffirmed 2007
|
|
|
|
| 390-1987 |
|
Active - IEEE standard for pulse transformers
Reaffirmed 1993, 2007
|
|
|
|
| 393-1991 |
|
Active - IEEE standard for test procedures for magnetic cores
Reaffirmed 2007
|
|
|
|
| 399-1997 (Brown Book) |
|
Active - IEEE recommended practice for industrial and commercial power systems analysis. (Color Book Series - Brown Book)
|
|
|
|
| 400-2001 |
|
Active - IEEE Guide for field testing and evaluation of the insulation of shielded power cable systems
Revision of 400-1991
|
|
|
|
| 400.2-2004 |
|
Active - IEEE guide for field testing of shielded power cable systems using very low frequency (VLF)
|
|
|
|
| 436-1991 |
|
Active - IEEE guide for making corona (partial discharge) measurements on
electronics transformers
Reaffirmed 1998, 2007
|
|
|
|
| 446-1995 (Orange Book) |
|
Active - IEEE Recommended Practice For Emergency And Standby Power Systems For Industrial And Commercial Applications. (Color Book Series - Orange Book)
|
|
|
|
| 449-1998 |
|
Active - IEEE standard for ferroresonant voltage regulators
Reaffirmed 2007
|
|
|
|
| 484-2002 |
|
Active - IEEE Recommended Practice for Installation Design And Installation of Vented Lead-Acid Batteries for Stationary Applications
Reaffirmed 2008 Revision of 484-1996
|
|
|
|
| 485-1997 |
|
Active - IEEE recommended practice for sizing lead-acid batteries for
stationary applications
Reaffirmed 2003 An interpretation is available
|
|
|
|
| 488.1-2003 |
|
Active - IEEE standard for higher performance protocol for the standard digital interface for programmable instrumentation
Reaffirmed 2009 Replaced by 60488-1-2004
|
|
|
|
| 493-1997 (Gold Book) |
|
Archived - IEEE recommended practice for the design of reliable industrial and commercial power systems. (Color Book Series - Gold Book)
An interpretation is available Superseded by 493-2007 (Gold Book)
|
|
|
|
| 515-2004 |
|
Active - IEEE standard for the testing, design, installation, and maintenance of electrical resistance heat tracing for industrial applications
Revision of 515-1997
|
|
|
|
| 519-1992 |
|
Active - IEEE recommended practices and requirements for harmonic control in
electrical power systems
An Errata is available
|
|
|
|
| 525-2007 |
|
Active - IEEE Guide for the Design and Installation of Cable Systems in Substations
|
|
|
|
| 576-2000 |
|
Active - IEEE recommended practice for installation, termination, and
testing of insulated power cable as used in industrial and commerical
applications
|
|
|
|
| 602-1996 (White Book) |
|
Active - IEEE Recommended Practice for Electric Systems in Health Care Facilities. (Color Book Series - White Book)
|
|
|
|
| 605-1998 |
|
Active - IEEE guide for design of substation rigid-bus structures
An Errata is available
|
|
|
|
| 637-1985 |
|
Active - IEEE guide fopr the reclamation of insulating oil and criteria for its use
Reaffirmed 1992, 2002, 2007
|
|
|
|
| 638-1992 |
|
Active - IEEE standard for qualification of class 1E transformers for
nuclear power generating stations
An Errata is available Reaffirmed 1999, 2006
|
|
|
|
| 693-2005 |
|
Active - IEEE Std 693 - 2005 IEEE Recommended Practice for Seismic Design for Substations
Revision of 693-1997
|
|
|
|
| 716-1995 |
|
Active - Standard Test Language for All Systems - Common/Abbreviated Test Language for All Systems (C/ATLAS)
|
|
|
|
| 739-1995 (Bronze Book) |
|
Active - IEEE Recommended Practice For Energy Management In Industrial And Commercial Facilities. (Color Book Series - Bronze Book)
|
|
|
|
| 771-1998 |
|
Active - IEEE guide to the use of the ATLAS specification
|
|
|
|
| 835-1994 |
|
Active - IEEE Std 835-1994 - IEEE Standard Power Cable Ampacity Tables
|
|
|
|
| 837-2002 |
|
Active - IEEE standard for qualifying permanent connections used in substation grounding
Revision of 837-1989
|
|
|
|
| 857-1996 |
|
Active - IEEE recommended practice for test procedures for high-voltage
direct-current thyristor valves
Reaffirmed 2004
|
|
|
|
| 858-1993 |
|
Active - IEEE standard definitions in power operations terminology
|
|
|
|
| 859-1987 |
|
Active - IEEE standard terms for reporting and analyzing outage occurrences
and outage states of electrical transmission facilities
Reaffirmed 1993, 2002, 2008
|
|
|
|
| 902-1998 (Yellow Book) |
|
Active - IEEE guide for maintenance, operation, and safety of industrial and commercial power systems. (Color Book Series - Yellow Book)
|
|
|
|
| 91a-1991 |
|
Active - Graphic symbols for logic functions (includes IEEE Std 91a-1991
supplement, and IEEE STd 91-1984)
|
|
|
|
| 91a-1991 |
|
Active - Graphic symbols for logic functions
|
|
|
|
| 945-1984 |
|
Active - IEEE recommended practice for preferred metric units for use in electrical and electronics science and technology
Reaffirmed 1992, 1997, 2002,2008
|
|
|
|
| 946-2004 |
|
Active - IEEE Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Stations
Revision of 946-1992
|
|
|
|
| 960-1993 |
|
Active - 1. Introduction and general information
|
|
|
|
| 979-1994 |
|
Active - IEEE guide for substation fire protection
|
|
|
|
| 980-1994 |
|
Active - IEEE guide for containment and control of oil spills in substations
Reaffirmed 2001 An interpretation is available
|
|
|
|
| 991-1986 |
|
Active - IEEE standard for logic circuit diagrams. Corrected edition
|
|
|
|
| 993-1997 |
|
Active - IEEE standard for Test Equipment Description Language (TEDL)
|
|
|
|
| 998-1996 |
|
Active - IEEE Guide for Direct Lightning Stroke Shielding of Substations
|
|
|
|
| 1031-2000 |
|
Active - IEEE Guide for the Functional Specification of Transmission Static Var Compensators
Revision of 1031-1991
|
|
|
|
| 1048-2003 |
|
Active - IEEE guide for protective grounding of power lines
Revision of 1048-1990
|
|
|
|
| 1057-2007 |
|
Active - IEEE Standard for Digitizing Waveform Recorders
Revision of 1057-1994
|
|
|
|
| 1100-2005 (Emerald Book) |
|
Active - IEEE Std 1100 - 2005 IEEE Recommended Practice for Powering and Grounding Electronic Equipment. (Color Book Series - Emerald Book)
Revision of 1100-1999 (Emerald Book)
|
|
|
|
| 1106-2005 |
|
Active - IEEE recommended practice for installation, maintenance, testing, and replacement of vented nickel-cadmium batteries for stationary applications
Revision of 1106-1995
|
|
|
|
| 1110-2002 |
|
Active - IEEE Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability Analyses
Reaffirmed 2007 Revision of 1110-1991
|
|
|
|
| 1122-1998 |
|
Active - IEEE standard for digital recorders for measurements in high voltage impulse tests
Reaffirmed 2007
|
|
|
|
| 1125-1993 |
|
Active - IEEE guide for moisture measurement and control in SF/sub 6/ Gas-Insulated Equipment
|
|
|
|
| 1127-1998 |
|
Active - IEEE guide for the design, construction, and operation of electric
power substations for community acceptance and environmental
compatibility
|
|
|
|
| 1149.1-2001 |
|
Active - IEEE standard test access port and boundary-scan architecture
Reaffirmed 2008
|
|
|
|
| 1149.4-1999 |
|
Active - IEEE standard for a mixed-signal test bus
|
|
|
|
| 1149.6-2003 |
|
Active - IEEE Std. 1149.6
|
|
|
|
| 1159.3-2003 |
|
Active - IEEE recommended practice for the transfer of power quality data
|
|
|
|
| 1160-1993 |
|
Active - IEEE standard test procedures for high-purity germanium crystals
for radiation detectors
|
|
|
|
| 1174-2000 |
|
Active - IEEE standard serial interface for programmable instrumentation
|
|
|
|
| 1184-2006 |
|
Active - IEEE Guide for Batteries for Uninterruptible Power Supply Systems
|
|
|
|
| 1187-2002 |
|
Active - IEEE Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Storage Batteries for Stationary Applications
Revision of 1187-1996
|
|
|
|
| 1188-2005 |
|
Active - IEEE Recommended Practice for Maintenance, Testing, and Replacement of Valve-Regulated Lead- Acid (VRLA) Batteries for Stationary Applications
Revision of 1188-1996
|
|
|
|
| 1193-2003 |
|
Active - IEEE Std 1193 - 2003 - (Revision of IEEE Std 1193 - 1994) - IEEE Guide for Measurement of Environmental Sensitivities of Standard Frequency Generators
Revision of 1193-1994
|
|
|
|
| 1226-1998 |
|
Active - IEEE trial-use standard for A Broad Based Environment for Test
(ABBET), overview and architecture
|
|
|
|
| 1226.3-1998 |
|
Active - IEEE standard for software interface for resource management for A
Broad-Based Environment for Test (ABBET)
|
|
|
|
| 1232.1-1997 |
|
Active - IEEE trial-use standard for Artificial Intelligence Exchange and
Service Tie to All Test Environments (AI-ESTATE): data and knowledge
specification
|
|
|
|
| 1232.2-1998 |
|
Active - IEEE trial-use standard for Artificial Intelligence Exchange and
Service Tie to All Test Environments (AI-ESTATE): service specification
|
|
|
|
| 1240-2000 |
|
Active - IEEE Guide for the Evaluation of the Reliability of HVDC Converter
Stations
|
|
|
|
| 1241-2000 |
|
Active - IEEE standard for terminology and test methods for
analog-to-digital converters
|
|
|
|
| 1246-2002 |
|
Active - IEEE guide for temporary protective grounding systems used in substations
Revision of 1246-1997
|
|
|
|
| 1264-1993 |
|
Active - IEEE guide for animal deterrents for electric power supply
substations
|
|
|
|
| 1267-1999 |
|
Active - IEEE trial-use guide for development of specifications for turnkey
substation projects
|
|
|
|
| 1268-2005 |
|
Active - IEEE Guide for Safety in the Installation of Mobile Substation Equipment
Revision of 1268-1997
|
|
|
|
| 1276-1997 |
|
Active - IEEE trial-use guide for the application of high-temperature
insulation materials in liquid-immersed power transformers
Reaffirmed 2006
|
|
|
|
| 1303-1994 |
|
Active - IEEE guide for static VAr compensator field tests
|
|
|
|
| 1332-1998 |
|
Active - IEEE standard reliability program for the development and
production of electronic systems and equipment
|
|
|
|
| 1346-1998 |
|
Active - IEEE recommended practice for evaluating electric power system
compatibility with electronic process equipment
|
|
|
|
| 1378-1997 |
|
Active - IEEE guide for commissioning High-Voltage Direct-Current (HVDC)
converter stations and associated transmission systems
Reaffirmed 2002,2008
|
|
|
|
| 1379-2000 |
|
Active - IEEE recommended practice for data communications between remote
terminal units and intelligent electronic devices in a substation
|
|
|
|
| 1402-2000 |
|
Active - IEEE guide for electric power substation physical and electronic
security
|
|
|
|
| 1413-1998 |
|
Active - IEEE standard methodology for reliability prediction and assessment
for electronic systems and equipment
|
|
|
|
| 1413.1-2002 |
|
Active - IEEE Std 1413.1 - 2002
|
|
|
|
| 1416-1998 |
|
Active - IEEE recommended practice for the interface of new gas-insulated
equipment in existing gas-insulated substations
|
|
|
|
| 1427-2006 |
|
Active - IEEE Guide for Recommended Electrical Clearances and Insulation Levels in Air-Insulated Electrical Power Substations
|
|
|
|
| 1445-1998 |
|
Active - IEEE standard for Digital Test Interchange Format (DTIF)
|
|
|
|
| 1450.1-2005 |
|
Active - IEEE Std. 1450.1 - 2005 IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450 /sup TM/ 1999) for Semiconductor Design Environments
An Errata is available
|
|
|
|
| 1450.3-2007 |
|
Active - IEEE Standard for Extensions to Standard Test Interface Language (STIL) (IEEE Std 1450-1999) for Tester Target Specification
|
|
|
|
| 1450.6-2005 |
|
Active - IEEE Standard Test Interface Language (STIL) for Digital Test Vector Data-Core Test Language (CTL)
|
|
|
|
| 1451.0-2007 |
|
Active - IEEE Standard for a Smart Transducer Interface for Sensors and Actuators - Common Functions, Communication Protocols, and Transducer Electronic Data Sheet (TEDS) Formats
|
|
|
|
| 1451.2-1997 |
|
Active - IEEE standard for a smart transducer interface for sensors and
actuators - transducer to microprocessor communication protocols and
Transducer Electronic Data Sheet (TEDS) formats
|
|
|
|
| 1451.3-2003 |
|
Active - IEEE Standard for a Smart Transducer Interface for Sensors and Actuators-Digital Communication and Transducer Electronic Data Sheet (TEDS) Formats for Distributed Multidrop Systems
|
|
|
|
| 1451.4-2004 |
|
Active - IEEE Standard for A Smart Transducer Interface for Sensors and Actuators - Mixed-Mode Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats
|
|
|
|
| 1451.5-2007 |
|
Active - IEEE Standard for a Smart Transducer Interface for Sensors and Actuators¿ Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats
|
|
|
|
| 1459-2000 |
|
Active - IEEE Trial-Use Standard Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced Conditions
|
|
|
|
| 1505-2006 |
|
Active - IEEE Standard for Receiver Fixture Interface
|
|
|
|
| 1505.1-2008 |
|
Active - IEEE trial-use standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505¿
|
|
|
|
| 1515-2000 |
|
Active - IEEE Recommended Practice for Electronic Power Subsystems:
Parameter Definitions, Test Conditions, and Test Methods
|
|
|
|
| 1522-2004 |
|
Active - IEEE Trial-Use Standard for Testability and Diagnosability Characteristics and Metrics
|
|
|
|
| 1527-2006 |
|
Active - IEEE Recommended Practice for the Design of Flexible Buswork Located in Seismically Active Areas
|
|
|
|
| P1527/D15, Oct 2005 |
|
Draft - Draft Recommended Practice for the Design of Flexible Buswork Located in Seismically Active Areas
|
|
|
|
| 1532-2002 |
|
Active - IEEE Standard for In-System Configuration of Programmable Devices
Revision of 1532-2001
|
|
|
|
| 1534-2002 |
|
Withdrawn - IEEE Recommended Practice for Specifying Thyristor-Controlled Series Capacitors
Withdrawn 14 Jan 2008
|
|
|
|
| 1538-2000 |
|
Active - IEEE Guide for Determination of Maximum Winding Temperature Rise in
Liquid-Filled Transformers
Reaffirmed 2005
|
|
|
|
| 1546-2000 |
|
Active - IEEE guide for digital test interchange format (DTIF) application
|
|
|
|
| 1573-2003 |
|
Active - IEEE Recommended Practice for Electronic Power Subsystems: Parameters, Interfaces, Elements, and Performance
|
|
|
|
| 1585-2002 |
|
Active - IEEE guide for the functional specification of medium voltage (1-35 kV)electronic series devices for compensation of voltage fluctuations
Reaffirmed 2007
|
|
|
|
| 1588-2008 |
|
Active - IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems
An interpretation is available
|
|
|
|
| P1601/D10, Mar 2008 |
|
Active Unapproved Draft - Draft Trial-Use Standard for Optical A.C. Current and Voltage Sensing Systems
|
|
|
|
| 1615-2007 |
|
Active - IEEE Recommended Practice for Network Communication in Electric Power Substations
|
|
|
|
| P1615/D11, Nov 2006 |
|
Active Unapproved Draft - Unapproved Draft Recommended Practice for Network Communication in Electric Power Substations
|
|
|
|
| 1623-2004 |
|
Active - IEEE Guide for the Functional Specification of Medium Voltage (1 kV-35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation
|
|
|
|
| 1636.1-2007 |
|
Active - IEEE Trial-Use Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA): Exchanging Test Results and Session Information via the eXtensible Markup Language (XML)
|
|
|
|
| P1636.1/D3, Jan 09 |
|
Active Unapproved Draft - IEEE Draft Trial-Use Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA): Exchanging Test Results and Session Information via the eXtensible Markup Language (XML)
|
|
|
|
| P1636.2/D3, Aug 2008 |
|
Active Unapproved Draft - Draft Trial-Use Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA): Exchanging Maintenance Action Information (MAI) via the Extensible Markup Language (XML)
|
|
|
|
| 1641.1-2006 |
|
Active - IEEE Guide for the Use of IEEE Std 1641, Standard for Signal and Test Definition
|
|
|
|
| 1646-2004 |
|
Active - IEEE Standard Communication Delivery Time Performance Requirements for Electric Power Substation Automation
|
|
|
|
| 1650-2005 |
|
Active - IEEE Standard Test Methods for Measurement of Electrical Properties of Carbon Nanotubes
|
|
|
|
| 1671.2-2008 |
|
Active - IEEE trial-use standard for automatic test markup language (ATML) for exchanging automatic test equipment and test information via XML: exchanging instrument descriptions
|
|
|
|
| 1671.3-2007 |
|
Active - IEEE Trial-Use Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Information via eXtensible Markup Language (XML): Exchanging Unit Under Test (UUT) Description Information
|
|
|
|
| 1671.4-2007 |
|
Active - IEEE Trial-Use Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Information via eXtensible Markup Language (XML): Exchanging Test Configuration Information
|
|
|
|
| 1671.5-2008 |
|
Active - IEEE trial-use standard for automatic test markup language (ATML) for exchanging automatic test information via XML: exchanging test adapter information
|
|
|
|
| 1671.6-2008 |
|
Active - IEEE Trial-Use Standard for Automatic Test Markup Language (ATML) for Exchanging Automatic Test Information via XML: Exchanging Test Station Information
|
|
|
|
| 1686-2007 |
|
Active - IEEE Standard for Substation Intelligent Electronic Devices (IEDs) Cyber Security Capabilities
|
|
|
|
| 60488-1-2004 |
|
Active - Higher performance protocol for the standard digital interface for programmable instrumentation - Part 1: General
|
|
|
|
| 60488-2-2004 |
|
Active - Standard digital interface for programmable instrumentation - Part 2: Codes, formats, protocols and common commands
|
|
|
|
| IEC 62032-2005 IEEE C57.135-2005 |
|
Active - IEC/IEEE Guide for the application, specification, and testing of phase-shifting transformers
|
|
|
|
| IEC 62243 First edition 2005-07 |
|
Active - Artificial intelligence exchange and service tie to all test environments (AI-ESTATE)
|
|
|
|
| IEC 62525-Edition 1.0 - 2007 |
|
Active - Standard Test Interface Language (STIL) for Digital Test Vector Data
|
|
|
|
| IEC 62525:2007 (E), IEEE 1450-2007 |
|
Active - Standard Test Inerface Language (STIL) for Digital Test Vector Data
|
|
|
|
| IEC 62526 edition 1.0 2007 |
|
Active - Standard for extensions to standard test interface language (STIL) for semiconductor design environments
|
|
|
|
| IEC 62527:2007 (E), IEEE Std 1450.2-2007 |
|
Active - Standard for Extensions to Standard Test Interface Language (STIL) for DC Level Specification
|
|
|
|
| IEC 62528:2007 (E), IEEE Std 1500-2007 |
|
Active - Standard Testability Method for Embedded Core-based Integrated Circuits
|
|
|
|
| IEC 62529:2007 (E), IEEE Std 1641-2007 |
|
Active - Standard for Signal and Test Definition
|
|
|
|
| C37-91-2000 |
|
Active - IEEE guide for protective relay applications to power transformers
|
|
|
|
| C37.04-1999 |
|
Active - IEEE standard rating structure for AC high-voltage circuit breakers
An Errata is available Reaffirmed 2006
|
|
|
|
| C37.06.1-2000 |
|
Active - American National Standard Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated -Definite Purpose for Fast Transient Recovery Voltage Rise Times
|
|
|
|
| C37.09-1999 |
|
Active - IEEE standard test procedure for AC high-voltage circuit breakers
rated on a symmetrical current basis
Reaffirmed 2007
|
|
|
|
| C37.09a-2005 |
|
Active - IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Amendment 1: Capacitance Current Switching
Reaffirmed 2007
|
|
|
|
| C37.010-1999 |
|
Active - IEEE application guide for AC high-voltage circuit breakers rated
on a symmetrical current basis
Reaffirmed 2005
|
|
|
|
| C37.011-2005 |
|
Active - IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers
Revision of C37.011-1994
|
|
|
|
| C37.012-2005 |
|
Active - IEEE Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers
Revision of C37.012-1979
|
|
|
|
| C37.1-2007 |
|
Active - IEEE standard for SCADA and automation systems
Revision of C37.1-1994
|
|
|
|
| C37.2-2008 |
|
Active - IEEE Standard for Electrical Power System Device Function Numbers, Acronyms, and Contact Designations
Revision of C37.2-1996
|
|
|
|
| C37.10.1-2000 |
|
Active - IEEE guide for the selection of monitoring for circuit breakers
|
|
|
|
| C37.11-1997 |
|
Active - IEEE standard requirements for electrical control for AC
high-voltage circuit breakers rated on a symmetrical current basis
|
|
|
|
| C37.14-2002 |
|
Active - IEEE standard for low-voltage DC power circuit breakers used in enclosures
Reaffirmed 2008 Revision of C37.14-1999
|
|
|
|
| C37.16-2000 |
|
Active - American National Standard Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors- Preferred Ratings, Related Requirements, and Application Recommendations
|
|
|
|
| C37.17-1997 |
|
Active - American National Standard for Trip Devices for AC and General Purpose DC Low Voltage Power Circuit Breakers
|
|
|
|
| C37.18-1979 |
|
Active - IEEE Standard Field Discharge Circuit Breakers For Rotating Electric Machinery
|
|
|
|
| C37.20.1a-2005 |
|
Active - IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear Amendment 1: Short-Time and Short-Circuit Withstand Current Tests- Minimum Areas for Multiple Cable Connections
Reaffirmed 2007
|
|
|
|
| C37.20.2-1999 |
|
Active - IEEE Standard for Metal-Clad Switchgear
|
|
|
|
| C37.20.3-2001 |
|
Active - IEEE standard for metal-enclosed interrupter switchgear
|
|
|
|
| C37.20.4-2001 |
|
Active - IEEE standard for indoor AC switches (1kV-38kV) for use in
metal-enclosed switchgear
|
|
|
|
| C37.23-2003 |
|
Active - IEEE Std C37.23 - 2003 IEEE Standard for Metal-Enclosed Bus
Revision of C37.23-1987
|
|
|
|
| C37.24-2003 |
|
Active - IEEE guide for evaluating the effect of solar radiation on outdoor metal-enclosed switchgear
Revision of C37.24-1986
|
|
|
|
| C37.26-2003 |
|
Active - IEEE guide for methods of power factor measurement for low-voltage inductive test circuits
Reaffirmed 2009
|
|
|
|
| C37.30-1997 |
|
Active - IEEE standard requirements for high-voltage switches
|
|
|
|
| C37.35-1995 |
|
Active - IEEE guide for the application, installation, operation, and
maintenance of high-voltage air disconnecting and interrupter switches
|
|
|
|
| C37.40-2003 |
|
Active - IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
Reaffirmed 2009 Revision of C37.40-1993
|
|
|
|
| C37.42-1996 |
|
Active - American National Standard Specification for High-Voltage Expulsion Type Distribution Class Fuses, Cutouts, Fuse Disconnecting Switches and Fuse Links
|
|
|
|
| C37.47-2000 |
|
Active - American National Standard for High Voltage Current-Limiting Type Distribution Class Fuses and Fuse Disconnecting Switches
|
|
|
|
| C37.48-2005 |
|
Active - IEEE Std C37.48 - 2005 IEEE Guide for Application, Operation, and Maintenance of High-Voltage Fuses, Destribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
Revision of C37.48-1997
|
|
|
|
| C37.53.1-1989 |
|
Active - American National Standard High-Voltage Current-Limiting Motor-Starter Fuses - Conference Test Procedures
|
|
|
|
| C37.90.1-2002 |
|
Active - C37.90.1 IEEE Standard for Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus
Revision of C37.90.1-1989
|
|
|
|
| C37.90.2-2004 |
|
Active - IEEE Standard for Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers
Revision of C37.90.2-1995
|
|
|
|
| C37.90.3-2001 |
|
Active - IEEE standard electrostatic discharge tests for protective relays
Reaffirmed 2006
|
|
|
|
| C37.96-2000 |
|
Active - IEEE Guide for AC Motor Protection
Reaffirmed 2006
|
|
|
|
| C37.99-2000 |
|
Active - IEEE guide for the protection of shunt capacitor banks
Revision of C37.99-1990
|
|
|
|
| C37.100-1992 |
|
Active - IEEE standard definitions for power switchgear
|
|
|
|
| C37.103-2004 |
|
Active - IEEE Std C37.103 - 2004 IEEE Guide for Differential and Polarizing Relay Circuit Testing
Revision of C37.103-1990
|
|
|
|
| C37.121-1989 |
|
Active - American National Standard for Switchgear- Unit Substations- Requirements
|
|
|
|
| C37.122-1993 |
|
Active - IEEE standard for gas-insulated substations.
|
|
|
|
| C37.122.1-1993 |
|
Active - IEEE guide for gas-insulated substations.
Reaffirmed 2008 Withdrawn Standard
|
|
|
|
| C37.123-1996 |
|
Active - IEEE guide to specifications for gas-insulated, electric power
substation equipment
Reaffirmed 2002, 2008
|
|
|
|
| C50.13-2005 |
|
Active - IEEE Std C50.13 - 2005 IEEE standard for cylindrical-rotor 50 Hz and 60 Hz synchronous generators rated 10 MVA and above
|
|
|
|
| PC57.2/D12, Sept 2007 |
|
Active Unapproved Draft - Draft Standard Requirements, Terminology, and Test Code for Shunt Reactors Rated Over 500 kVA
|
|
|
|
| PC57.12.00/D2c, Sep 2008 |
|
Active Unapproved Draft - IEEE Draft Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
|
|
|
|
| C57.12.00-2000 |
|
Archived - IEEE standard general requirements for liquid-immersed distribution, power, and regulating transformers
|
|
|
|
| C57.12.00-2006 |
|
Active - IEEE Standard for Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers
|
|
|
|
| C57.12.01-2005 |
|
Active - IEEE Standard General Requirements for Dry-Type Distribution and Power Transformers, Including Those with Solid-Cast and/or Resin Encapsulated Windings
Revision of C57.12.01-1998
|
|
|
|
| C57.12.10-1997 |
|
Active - American National Standard for Transformers- 230 kV and Below 833 / 958 through 8333 / 10 417 kVA, Single-Phase, and 750 / 862 through 60 000 / 80 000 / 100 000 kVA, Three-Phase Without Load Tap Changing; and 3750 / 4687 through 60 000 / 80 000 / 100 000 kVA with Load Tap Changing- Safety Requirement
An interpretation is available
|
|
|
|
| C57.12.20-2005 |
|
Active - IEEE standard for overhead-type distribution transformers, 500 kVA and smaller: high voltage, 34 500 V and below; low voltage, 7970/13 800y V and below
An interpretation is available
|
|
|
|
| C57.12.21-1992 |
|
Active - American National Standard Requirements for Pad-Mounted, Compartmental-Type Self-Cooled, Single-Phase Distribution Transformers With High Voltage Bushings; High-Voltage, 34500 GRYD/19920 Volts and Below; Low-Voltage, 240/120 Volts; 167 kVA and Smaller
|
|
|
|
| C57.12.22-1993 |
|
Active - American National Standard for Transformers- Pad-Mounted, Compartmental-Type, Self-Cooled Three-Phase Distribution Transformers With High-Voltage Bushings, 2500 kVA and Smaller: High Voltage, 34 500 Grd Y/19 920 Volts and Below; Low Voltage, 480 Volts and Below
Reaffirmed 1998, 1998
|
|
|
|
| C57.12.25-1990 |
|
Active - American National Standard for Transformers - Pad-mounted, Compartmental-type, Self-cooled, Single-phase Distribution Transformers with Separable Insulated High-voltage Connectors; High Voltage, 34 500 Grdy/ 19 920 Volts and Below; Low Voltage, 240/120 Volts; 167 Kva and Smaller Requirements
|
|
|
|
| C57.12.26-1992 |
|
Active - IEEE Standard for Pad-mounted, Compartmental-Type, Self-cooled, Three-phase Distribution Transformers for Use with Separable Insulated High-voltage Connectors (34 500 Grd Y/19 920 V and Below, 2500 Kva and Smaller)
|
|
|
|
| C57.12.28-2005 |
|
Active - IEEE Std. C57.12.28 - 2005 IEEE Standard for Pad-Mounted Equipment - Enclosure Integrity
|
|
|
|
| C57.12.29-2005 |
|
Active - IEEE Standard for Pad-Mounted Equipment - Enclosure Integrity for Coastal Environments
|
|
|
|
| C57.12.31-2002 |
|
Active - IEEE standard for pole mounted equipment - enclosure integrity
|
|
|
|
| C57.12.32-2002 |
|
Active - IEEE standard for submersible equipment - enclosure integrity
Reaffirmed 2008
|
|
|
|
| C57.12.34-2004 |
|
Active - IEEE standard requirements for pad-mounted, compartmental-type, self-cooled, three-phase distribution transformers (2500 kVA and smaller)- high-voltage: 34 500 GrdY/19 920 volts and below; low-voltage: 480 volts and below
An Errata is available
|
|
|
|
| C57.12.35-2007 |
|
Active - IEEE Standard for Bar Coding for Distribution Transformers and Step-Voltage Regulators
Revision of C57.12.35-1996
|
|
|
|
| C57.12.36-2007 |
|
Active - IEEE Standard Requirements for Liquid-Immersed Distribution Substation Transformers
|
|
|
|
| C57.12.37-2006 |
|
Active - IEEE Standard for the Electronic Reporting of Distribution Transformer Test Data
Revision of 1388-2000
|
|
|
|
| C57.12.40-2000 |
|
Archived - American National Standard for Secondary Network Transformers Subway and Vault Types (Liquid Immersed)-Requirements
|
|
|
|
| C57.12.40-2006 |
|
Active - IEEE Standard Requirements for Secondary Network Transformers, Subway and Vault Types (Liquid Immersed)
|
|
|
|
| C57.12.44-2005 |
|
Active - IEEE Standard Requirements for Secondary Network Protectors
An interpretation is available Revision of C57.12.44-2000
|
|
|
|
| C57.12.50-1981 |
|
Active - American National Standard Requirements for Ventilated Dry-Type Distribution Transformers, 1 to 500 kVA, Single-Phase, and 15 to 500 kVA, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 120 to 600 Volts
|
|
|
|
| C57.12.52-1981 |
|
Active - American National Standard Requirements for Sealed Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts
|
|
|
|
| C57.12.55-1987 |
|
Active - American National Standard for Transformers - Used in Unit Installations, Including Unit Substations-Conformance Standard
|
|
|
|
| C57.12.56-1986 |
|
Active - IEEE standard test procedure for thermal evaluation of insulation systems for ventilated dry-type power and distribution tranformers
|
|
|
|
| C57.12.58-1991 |
|
Active - IEEE guide for conducting a transient voltage analysis of a
dry-type transformer coil
Reaffirmed 1996,2002,2008
|
|
|
|
| C57.12.59-2001 |
|
Active - IEEE guide for dry-type transformer through-fault current duration
Reaffirmed 2006
|
|
|
|
| C57.12.60-1998 |
|
Active - IEEE guide for test procedures for thermal evaluation of insulation
systems for solid-cast and resin-encapsulated power and distribution
transformers
|
|
|
|
| C57.12.70-2000 |
|
Active - IEEE standard terminal markings and connections for distribution and power transformers
|
|
|
|
| C57.12.80-2002 |
|
Active - IEEE standard terminology for power and distribution transformers
Revision of C57.12.80-1978
|
|
|
|
| C57.12.90-2006 |
|
Active - IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers
An interpretation is available
|
|
|
|
| C57.12.91-2001 |
|
Active - IEEE standard test code for dry-type distribution and power
transformers
An interpretation is available
|
|
|
|
| C57.13-2008 |
|
Active - IEEE Standard Requirements for Instrument Transformers
|
|
|
|
| C57.13.1-2006 |
|
Active - IEEE Guide for Field Testing of Relaying Current Transformers
|
|
|
|
| C57.13.2-2005 |
|
Active - IEEE Std. C57.13.2 - 2005 IEEE Standard Conformance Test Procedure for Instrument Transformers
|
|
|
|
| C57.13.3-2005 |
|
Active - IEEE Std C57.13.3 - 2005 IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases
Revision of C57.13.3-1983
|
|
|
|
| C57.13.5-2003 |
|
Active - IEEE Trial-Use Standard of Performance and Test Requirements for Instrument and Transformers of a Nominal System Voltage of 115 kV and Above
|
|
|
|
| C57.13.6-2005 |
|
Active - IEEE Standard for High-Accuracy Instrument Transformers
|
|
|
|
| C57.15-1999 |
|
Active - IEEE standard requirements, terminology, and test code for
step-voltage regulators
|
|
|
|
| C57.16-1996 |
|
Active - IEEE standard requirements, terminology, and test code for dry-type
air-core series-connected reactors
|
|
|
|
| C57.18.10-1998 |
|
Active - IEEE standard practices and requirements for semiconductor power
rectifier transformers
An Errata is available Reaffirmed 2003
|
|
|
|
| C57.18.10a-2008 |
|
Active - IEEE Standard for Practices and Requirements for Semiconductor Power Rectifier Transformers Amendment 1: Added Technical and Editorial Corrections
|
|
|
|
| C57.19.00-2004 |
|
Active - IEEE Std. C57.19.00 - 2004 IEEE Standard General Requirements and Test Procedure for Power Apparatus Bushings
|
|
|
|
| C57.19.01-2000 |
|
Active - IEEE standard performance characteristics and dimensions for
outdoor apparatus bushings
|
|
|
|
| C57.19.03-1996 |
|
Active - IEEE standard requirements, terminology, and test code for bushings
for DC applications
Reaffirmed 2002 Superseded by C57.19.03-2005
|
|
|
|
| C57.19.03-2005 |
|
Active - IEEE Std C57.19.03 2005 - IEEE Standard Requirements, Terminology, and Test Code for Bushings for DC Applications - Corrigendum 1
Corrigendum to C57.19.03-1996
|
|
|
|
| C57.19.100-1995 |
|
Active - IEEE guide for application of power apparatus bushings
|
|
|
|
| C57.21-2008 |
|
Active - IEEE Standard Requirements, Terminology, and Test Code for Shunt Reactors Rated Over 500 kVA
Revision of C57.21-1990
|
|
|
|
| C57.91-1995 |
|
Active - IEEE guide for loading mineral-oil-immersed transformers
An Errata is available Reaffirmed 2002, 2004 An interpretation is available
|
|
|
|
| C57.91-1995/Cor 1-2002 |
|
Active - C57.91-1995/Cor 1-2002 IEEE guide for loading mineral-oil- immersed transformers corrigendum 1
|
|
|
|
| C57.93-2007 |
|
Active - IEEE Guide for Installation and Maintenance of Liquid-Immersed Power Transformers
|
|
|
|
| C57.94-1982 |
|
Active - IEEE recommended practice for installation, application, operation, and maintenance of dry-type general purpose distribution and power transformers
Reaffirmed 1987, 2000, 2006
|
|
|
|
| C57.96-1999 |
|
Active - IEEE guide for loading dry-type distribution and power transformers
|
|
|
|
| C57.98-1993 |
|
Active - IEEE guide for transformer impulse tests
An Errata is available Reaffirmed 1999
|
|
|
|
| C57.100-1999 |
|
Active - IEEE standard test procedure for thermal evaluation of
liquid-immersed distribution and power transformers
|
|
|
|
| C57.104-2008 |
|
Active - IEEE guide for the interpretation of gases generated in oil-immersed transformers
|
|
|
|
| PC57.104/D3, Jul 2007 |
|
Active Unapproved Draft - Draft Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers
|
|
|
|
| PC57.104/D3.2 Mar 2008 |
|
Active Unapproved Draft - IEEE Draft Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers
|
|
|
|
| PC57.104/D3.3, Aug 2008 |
|
Active Approved Draft - IEEE Draft Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers
|
|
|
|
| PC57.104/D3.3, Aug 2008 |
|
Active Unapproved Draft - Draft Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers
|
|
|
|
| C57.105-1978 |
|
Active - IEEE guide for application of transformer connections in three-phase distribution systems
|
|
|
|
| C57.106-2006 |
|
Active - IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment
Revision of C57.106-2002
|
|
|
|
| C57.109-1993 |
|
Active - IEEE guide for liquid-immersed transformer through-fault-current duration
|
|
|
|
| C57.110-2008 |
|
Active - IEEE Recommended Practice for Establishing Liquid-Filled and Dry-Type Power and Distribution Transformer Capability When Supplying Nonsinusoidal Load Currents
Revision of C57.110-1998
|
|
|
|
| C57.111-1989 |
|
Active - IEEE guide for acceptance of silicone insulating fluid and its
maintenance in transformers
Reaffirmed 1995, 2003, 2009 An interpretation is available
|
|
|
|
| C57.113-1991 |
|
Active - IEEE guide for partial discharge measurement in liquid- filled
power transformers and shunt reactors
|
|
|
|
| C57.113-1991 |
|
Active - IEEE Guide for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt Reactors
|
|
|
|
| C57.116-1989 |
|
Active - IEEE guide for transformers directly connected to generators
|
|
|
|
| C57.117-1986 |
|
Active - IEEE guide for reporting failure data for power transformers and
shunt reactors on electric utility power systems
|
|
|
|
| C57.119-2001 |
|
Active - IEEE recommended practice for performing temperature rise tests on oil-immersed power transformers at loads beyond nameplate ratings
|
|
|
|
| C57.120-1991 |
|
Active - IEEE loss evaluation guide for power transformers and reactors
Reaffirmed 2000, 2006
|
|
|
|
| C57.121-1998 |
|
Active - IEEE guide for acceptance and maintenance of less flammable
hydrocarbon fluid in transformers
|
|
|
|
| C57.123-2002 |
|
Active - IEEE Guide for Transformer Loss Measurement
|
|
|
|
| C57.124-1991 |
|
Active - IEEE recommended practice for the detection of partial discharge
and the measurement of apparent charge in dry -type transformers
|
|
|
|
| C57.125-1991 |
|
Active - IEEE guide for failure investigation, documentation, and analysis
for power transformers and shunt reactors
|
|
|
|
| C57.127-2007 |
|
Active - IEEE Guide for the Detection and Location of Acoustic Emissions from Partial Discharges in Oil-Immersed Power Transformers and Reactors
|
|
|
|
| C57.129-2007 |
|
Active - IEEE Standard for General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers
|
|
|
|
| PC57.130/D17, Jun 2006 |
|
Active Unapproved Draft - Unapproved IEEE Trial-Use Guide for the Use of Dissolved Gas Analysis During Factory Temeprature Rise Tests for the Evaluation of Oil-Immersed Transformers and Reactors
|
|
|
|
| C57.131-1995 |
|
Active - IEEE standard requirements for load tap changers
|
|
|
|
| C57.134-2000 |
|
Active - IEEE guide for determination of hottest-spot temperature in
dry-type transformers
|
|
|
|
| C57.136-2000 |
|
Active - IEEE guide for sound level abatement and etermination for liquid-immersed power transformers and shunt reactors rated over 500 kVA
|
|
|
|
| C57.138-1998 |
|
Active - IEEE recommended practice for routine impulse test for distribution
transformers
|
|
|
|
| C57.140-2006 |
|
Active - IEEE Guide for the Evaluation and Reconditioning of Liquid Immersed Power Transformers
|
|
|
|
| PC57.142/D5.2, Jan 2009 |
|
Active Unapproved Draft - Guide To Describe The Occurrence and Mitigation Of Switching Transients Induced By Transformer, Switching Device, and System Interaction
|
|
|
|
| C57.144-2004 |
|
Active - IEEE Std C57.144 - 2004 - IEEE Guide for Metric Conversion of Transformer Standards
|
|
|
|
| C57.146-2005 |
|
Active - IEEE Std C57.146 2005
An interpretation is available
|
|
|
|
| C57.147-2008 |
|
Active - IEEE Guide for Acceptance and Maintenance of Natural Ester Fluids in Transformers
|
|
|
|
| C62.1-1989 |
|
Active - IEEE standard for gapped silicon-carbide surge arresters for AC
power circuits
|
|
|
|
| C62.2-1987 |
|
Active - IEEE guide for the application of gapped silicon-carbide surge
arresters for alternating current systems
|
|
|
|
| C62.11-2005 |
|
Active - IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)
Revision of C62.11-1999
|
|
|
|
| 1299/C62.22.1-1996 |
|
Active - IEEE guide for the connection of surge arresters to protect
insulated, shielded electric power cable systems
|
|
|
|
| C62.41-1991 |
|
Active - IEEE recommended practice on surge voltages in low-voltage AC power
circuits
|
|
|
|
| C62.41.1-2002 |
|
Active - IEEE Std. C62.41.1 - 2002
|
|
|
|
| C62.41.2-2002 |
|
Active - IEEE recommended practice on characterization of surges in low-voltage (1000 V and less) AC power circuits
|
|
|
|
| C62.92-1989 |
|
Active - IEEE guide for the application of neutral grounding in electrical
utility systems. Part II - grounding of synchronous generator systems
|
|
|
|
| C62.92.1-2000 |
|
Active - IEEE guide for the application of neutral grounding in electrical
utility systems - Part 1: introduction
|
|
|
|
| C62.92.3-1993 |
|
Active - IEEE guide for the neutral grounding in electrical utility systems, Part III-Generator Auxiliary Sys
|
|
|
|
| C62.92.4-1991 |
|
Active - IEEE guide for the application of neutral grounding in electrical
utility systems, part IV - distribution
|
|
|
|
| C62.92.5-1992 |
|
Active - IEEE guide for the application of neutral grounding in electrical
utility systems, part V - transmission systems and subtransmission
systems
|
|
|
|
| C67.92-1987 |
|
Active - IEEE Guide For The Application Of Neutral Grounding In Electrical Utility Systems Part I-introduction
|
|
|
|
| SI10-2002 |
|
Active - IEEE/ASTM SI 10 - 2002
An Errata is available Revision of IEEE/ASTM SI 10-1997
|
|
|
|
| Y32.9-1972 |
|
Active - American National Standard graphic symbols for electrical wiring and layout diagrams used in architecture and building construction
|
|
|
|