| 4a-2001 |
 |
Active - Amendment to IEEE standard techniques for high-voltage testing
|
|
|
|
| 7-4.3.2-2003 |
|
Active - IEEE standard criteria for digital computers in safety systems of nuclear power generating stations
Revision of 7-4.3.2-1993
|
|
|
|
| 11-2000 |
|
Active - IEEE Standard for Rotating Electric Machinery for Rail and Road
Vehicles
Reaffirmed 2006
|
|
|
|
| 16-2004 |
|
Withdrawn - IEEE Standard for Electrical and Electronic Control Apparatus on Rail Vehicles
|
|
|
|
| 18-2002 |
|
Active - IEEE Standard for Shunt Power Capacitors
Revision of 18-1992
|
|
|
|
| 43-2000 |
|
Active - IEEE recommended practice for testing insulation resistance of
rotating machinery
|
|
|
|
| 45-2002 |
|
Active - IEEE Recommended Practice for Electrical Installations on Shipboard
An interpretation is available Revision of 45-1998
|
|
|
|
| 62.2-2004 |
|
Active - IEEE Std 62.2 - 2004 IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus
|
|
|
|
| 67-2005 |
|
Active - IEEE Guide for Operation and Maintenance of Turbine Generators
Revision of 67-1990
|
|
|
|
| 80-2000 |
|
Active - IEEE guide for safety in AC substation grounding
|
|
|
|
| 81-1983 |
|
Active - IEEE guide for measuring earth resistivity, ground impedance, and earth surface potentials of a ground system
|
|
|
|
| 95-2002 |
|
Active - IEEE recommended practice for insulation testing of AC electric machinery (2300 V and above) with high direct voltage
Reaffirmed 2007 Revision of 95-1977
|
|
|
|
| 98-2002 |
|
Active - 98 IEEE Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials
An Errata is available Reaffirmed 2007 Revision of 98-1984
|
|
|
|
| 99-2007 |
|
Active - IEEE recommended practice for the preparation of test procedures for the thermal evaluation of insulation systems for electrical equipment
Revision of 99-1980
|
|
|
|
| 112-2004 |
|
Active - IEEE Standard Test Procedure for Polyphase Induction Motors and Generators
Revision of 112-1996
|
|
|
|
| 115-1995 |
|
Active - IEEE Guide: Test Procedures for Synchronous Machines
|
|
|
|
| 120-1989 |
|
Active - IEEE master test guide for electrical measurements in power
circuits
|
|
|
|
| 141-1993 (Red Book) |
|
Active - IEEE recommended practice for electric power distribution for industrial plants. (Color Book Series - Red Book)
An Errata is available Reaffirmed 1999
|
|
|
|
| 241-1990 (Gray Book) |
|
Active - IEEE recommended practice for electric power systems in commercial buildings. (Color Book Series - Gray Book)
|
|
|
|
| 242-2001 (Buff Book) |
|
Active - IEEE recommended practice for protection and coordination of industrial and commercial power systems. (Color Book Series - Buff Book)
An Errata is available
|
|
|
|
| 252-1995 |
|
Active - IEEE standard test procedure for polyphase induction motors having
liquid in the magnetic gap
Reaffirmed 2007
|
|
|
|
| 286-2000 |
|
Active - IEEE Recommended Practic for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
|
|
|
|
| 300-1988 |
|
Active - IEEE standard test procedures for semiconductor charged-particle
detectors
|
|
|
|
| 301-1988 |
|
Active - IEEE standard test procedures for amplifiers and preamplifiers used
with detectors of ionizing radiation
|
|
|
|
| 308-2001 |
|
Active - Ieee Standard Criteria For Class 1E Power Systems For Nuclear Power Generating Stations
Reaffirmed 2007 Revision of 308-1991
|
|
|
|
| 315-1975 |
|
Active - Graphic Symbols for Electrical and Electronics Diagrams (Including Reference Designation Letters)
|
|
|
|
| 317-1983 |
|
Active - IEEE standard for electric penetration assemblies in containment structures for nuclear power generating stations
|
|
|
|
| 323-2003 |
|
Active - IEEE Std. 323 ™ IEEE standard for qualifying class 1E equipment for nuclear power generating stations
Reaffirmed 2008 Revision of 323-1983
|
|
|
|
| 325-1996 |
|
Active - IEEE standard test procedures for germanium gamma-ray detectors
|
|
|
|
| 334-2006 |
|
Active - IEEE Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations
|
|
|
|
| 336-2005 |
|
Active - IEEE Guide for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities
Revision of 336-1985
|
|
|
|
| 338-2006 |
|
Active - IEEE Standard Crieteria for Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems
|
|
|
|
| P338/D4, Sep 2006 |
|
Active Unapproved Draft - Unapproved Draft Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems (ANSI/IEEE Std 338-2006 Revision of ANSI/IEEE Std 338-1987)
|
|
|
|
| 344-2004 |
|
Active - IEEE Std. 344 - 2004 IEEE Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations
Reaffirmed 2009 Revision of 344-1987
|
|
|
|
| 352-1987 |
|
Active - IEEE guide for general principles of reliability analysis of nuclear power generating station safety systems
|
|
|
|
| 367-1996 |
|
Active - IEEE recommended practice for determining the electric power
station ground potential rise and induced voltage from a power
fault
|
|
|
|
| 379-2000 |
|
Active - IEEE Standard Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety Systems
Reaffirmed 2008
|
|
|
|
| 382-2006 |
|
Active - IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations
|
|
|
|
| 383-2003 |
|
Active - IEEE standard for qualifying class 1E electric cables and field splices for nuclear power generating stations
Revision of 383-1974
|
|
|
|
| 384-2008 |
|
Active - IEEE Standard Criteria for Independence of Class 1E Equipment and Circuits
|
|
|
|
| 387-1995 |
|
Active - IEEE standard criteria for diesel-generator units applied as
standby power supplies for nuclear power generating stations
Reaffirmed 2001, 2007 An interpretation is available
|
|
|
|
| 393-1991 |
|
Active - IEEE standard for test procedures for magnetic cores
Reaffirmed 2007
|
|
|
|
| 398-1972 |
|
Active - IEEE standard test procedures for photomultipliers for scintillation counting and glossary for scintillation counting field
|
|
|
|
| 399-1997 (Brown Book) |
|
Active - IEEE recommended practice for industrial and commercial power systems analysis. (Color Book Series - Brown Book)
|
|
|
|
| 400-2001 |
|
Active - IEEE Guide for field testing and evaluation of the insulation of shielded power cable systems
Revision of 400-1991
|
|
|
|
| 400.2-2004 |
|
Active - IEEE guide for field testing of shielded power cable systems using very low frequency (VLF)
|
|
|
|
| 420-2001 |
|
Active - IEEE standard for the design and qualification of class 1E control boards, panels, and racks used in nuclear power generating stations
Revision of 420-1982
|
|
|
|
| P433/D11 2006 |
|
Active Unapproved Draft - Unapproved Draft Recommended Practice for Insulation Testing of AC Electric Machinery with High Voltage at Very Low Frequency (Revision of IEEE 433-1974)
|
|
|
|
| 434-2006 |
|
Active - IEEE guide for functional evaluation of insulation systems for AC electric machines rated 2300 V and above
|
|
|
|
| P434_D10, Sep 2006 |
|
Active Unapproved Draft - Unapproved IEEE Draft Guide for Functional Evaluation of Insulation Systems for Large High-Voltage Machines (Revision of IEEE 434-1973)
|
|
|
|
| 446-1995 (Orange Book) |
|
Active - IEEE Recommended Practice For Emergency And Standby Power Systems For Industrial And Commercial Applications. (Color Book Series - Orange Book)
|
|
|
|
| 449-1998 |
|
Active - IEEE standard for ferroresonant voltage regulators
Reaffirmed 2007
|
|
|
|
| 484-2002 |
|
Active - IEEE Recommended Practice for Installation Design And Installation of Vented Lead-Acid Batteries for Stationary Applications
Reaffirmed 2008 Revision of 484-1996
|
|
|
|
| 485-1997 |
|
Active - IEEE recommended practice for sizing lead-acid batteries for
stationary applications
Reaffirmed 2003 An interpretation is available
|
|
|
|
| 492-1999 |
|
Active - IEEE guide for operation and maintenance of hydro-generators
|
|
|
|
| 493-1997 (Gold Book) |
|
Archived - IEEE recommended practice for the design of reliable industrial and commercial power systems. (Color Book Series - Gold Book)
An interpretation is available Superseded by 493-2007 (Gold Book)
|
|
|
|
| 497-2002 |
|
Active - IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
An Errata is available Revision of 497-1981
|
|
|
|
| 497-2002/Cor 1-2007 |
|
Active - IEEE Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations Corrigendum 1: Incorporation of User Feedback through 2005
Corrigendum to 497-2002
|
|
|
|
| 498-1985 |
|
Active - Ieee Standard Requirements For The Calibration And Control Of Measuring And Test Equipment Used In Nuclear Facilities
Superseded by 498-1990
|
|
|
|
| 515-2004 |
|
Active - IEEE standard for the testing, design, installation, and maintenance of electrical resistance heat tracing for industrial applications
Revision of 515-1997
|
|
|
|
| 519-1992 |
|
Active - IEEE recommended practices and requirements for harmonic control in
electrical power systems
An Errata is available
|
|
|
|
| 522-2004 |
|
Active - IEEE Guide for Testing Turn Insulation of Form-Wound Stator Coils for Alternating-Current Electric Machines
Reaffirmed 2009 Revision of 522-1992
|
|
|
|
| 535-2006 |
|
Active - IEEE Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
An interpretation is available
|
|
|
|
| 572-2006 |
|
Active - IEEE Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations
|
|
|
|
| P572/D4, 2006 |
|
Active Unapproved Draft - Unapproved Draft Standard for Qualifcation of Class 1E Connection Assemblies for Nuclear Power Generating Stations
|
|
|
|
| 576-2000 |
|
Active - IEEE recommended practice for installation, termination, and
testing of insulated power cable as used in industrial and commerical
applications
|
|
|
|
| 577-2004 |
|
Active - IEEE Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Facilities
Revision of 577-1976
|
|
|
|
| 583-1982 |
|
Active - IEEE standard modular instrumentation and digital interface system (CAMAC)
|
|
|
|
| 595-1982 |
|
Active - IEEE standard serial highway interface system (CAMAC)
|
|
|
|
| 596-1982 |
|
Active - IEEE Standard Parallel Highway Interface System (CAMAC*)
|
|
|
|
| 602-1996 (White Book) |
|
Active - IEEE Recommended Practice for Electric Systems in Health Care Facilities. (Color Book Series - White Book)
|
|
|
|
| 605-1998 |
|
Active - IEEE guide for design of substation rigid-bus structures
An Errata is available
|
|
|
|
| 620-1996 |
|
Active - IEEE guide for the presentation of thermal limit curves for
squirrel cage induction machines
|
|
|
|
| 622-1987 |
|
Active - IEEE recommended practice for the design and installation of electric heat tracing systems for nuclear power generating stations
|
|
|
|
| P627/D3, May 2008 |
|
Active Unapproved Draft - Draft Standard for Qualification of Equipment Used in Nuclear Facilities
|
|
|
|
| 628-2001 |
|
Active - IEEE Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nucler Power Generating Stations
Reaffirmed 2006
|
|
|
|
| 649-2006 |
|
Active - IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations
|
|
|
|
| 650-2006 |
|
Active - IEEE Standard for Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating Stations
Revision of 650-1990
|
|
|
|
| P650/D9. Feb 2006 |
|
Draft - Draft Standard for Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating Stations
|
|
|
|
| 675-1982 |
|
Active - IEEE standard multiple controllers in a CAMAC crate
|
|
|
|
| 683-1976 |
|
Active - IEEE recommended practice for block transfers in CAMAC systems
|
|
|
|
| 686-2008 |
|
Active - IEEE Standard Radar Definitions
Revision of 686-1997
|
|
|
|
| 690-2004 |
|
Active - IEEE standard for the design and installation of cable systems for class 1E circuits in nuclear power generating stations
Revision of 690-1984
|
|
|
|
| 692-1997 |
|
Active - IEEE standard criteria for security systems for nuclear power
generating stations
|
|
|
|
| P692/D3, Oct 2008 |
|
Active Unapproved Draft - Draft Standard for Security Systems for Nuclear Power Generating Stations
|
|
|
|
| 726-1982 |
|
Active - IEEE standard real-time BASIC for CAMAC
|
|
|
|
| 739-1995 (Bronze Book) |
|
Active - IEEE Recommended Practice For Energy Management In Industrial And Commercial Facilities. (Color Book Series - Bronze Book)
|
|
|
|
| 741-2007 |
|
Active - IEEE Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations
|
|
|
|
| 758-1979 |
|
Active - IEEE standard subroutines for CAMAC
|
|
|
|
| 762-2006 |
|
Active - IEEE standard definitions for use in reporting electric generating unit reliability, availability, and productivity
|
|
|
|
| P762-2006(R2002), 2002 |
|
Active Draft - Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity
|
|
|
|
| 765-2006 |
|
Active - IEEE Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations (NPGS)
|
|
|
|
| 833-2005 |
|
Active - IEEE Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards
Revision of 833-1988
|
|
|
|
| 835-1994 |
|
Active - IEEE Std 835-1994 - IEEE Standard Power Cable Ampacity Tables
|
|
|
|
| 837-2002 |
|
Active - IEEE standard for qualifying permanent connections used in substation grounding
Revision of 837-1989
|
|
|
|
| 845-1999 |
|
Active - IEEE guide for the evaluation of human-system performance in
nuclear power generating stations
|
|
|
|
| 858-1993 |
|
Active - IEEE standard definitions in power operations terminology
|
|
|
|
| 859-1987 |
|
Active - IEEE standard terms for reporting and analyzing outage occurrences
and outage states of electrical transmission facilities
Reaffirmed 1993, 2002, 2008
|
|
|
|
| 902-1998 (Yellow Book) |
|
Active - IEEE guide for maintenance, operation, and safety of industrial and commercial power systems. (Color Book Series - Yellow Book)
|
|
|
|
| 933-1999 |
|
Active - IEEE guide for the definition of reliability program plans for
nuclear power generating stations
|
|
|
|
| 946-2004 |
|
Active - IEEE Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Stations
Revision of 946-1992
|
|
|
|
| 960-1993 |
|
Active - 1. Introduction and general information
|
|
|
|
| 979-1994 |
|
Active - IEEE guide for substation fire protection
|
|
|
|
| 980-1994 |
|
Active - IEEE guide for containment and control of oil spills in substations
Reaffirmed 2001 An interpretation is available
|
|
|
|
| 1023-2004 |
|
Active - IEEE Std. 1023 - 2004 IEEE Recommended Practice for the Application of Human Factors Engineering to Systems, Equipment, and Facilities of Nuclear Power Generating Stations and Other Nuclear Facilities
Revision of 1023-1988
|
|
|
|
| 1048-2003 |
|
Active - IEEE guide for protective grounding of power lines
Revision of 1048-1990
|
|
|
|
| 1082-1997 |
|
Active - IEEE guide for incorporating human action reliability analysis for
nuclear power generating stations
|
|
|
|
| 1100-2005 (Emerald Book) |
|
Active - IEEE Std 1100 - 2005 IEEE Recommended Practice for Powering and Grounding Electronic Equipment. (Color Book Series - Emerald Book)
Revision of 1100-1999 (Emerald Book)
|
|
|
|
| 1106-2005 |
|
Active - IEEE recommended practice for installation, maintenance, testing, and replacement of vented nickel-cadmium batteries for stationary applications
Revision of 1106-1995
|
|
|
|
| 1110-2002 |
|
Active - IEEE Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability Analyses
Reaffirmed 2007 Revision of 1110-1991
|
|
|
|
| 1127-1998 |
|
Active - IEEE guide for the design, construction, and operation of electric
power substations for community acceptance and environmental
compatibility
|
|
|
|
| 1159.3-2003 |
|
Active - IEEE recommended practice for the transfer of power quality data
|
|
|
|
| 1160-1993 |
|
Active - IEEE standard test procedures for high-purity germanium crystals
for radiation detectors
|
|
|
|
| 1184-2006 |
|
Active - IEEE Guide for Batteries for Uninterruptible Power Supply Systems
|
|
|
|
| 1187-2002 |
|
Active - IEEE Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Storage Batteries for Stationary Applications
Revision of 1187-1996
|
|
|
|
| 1188-2005 |
|
Active - IEEE Recommended Practice for Maintenance, Testing, and Replacement of Valve-Regulated Lead- Acid (VRLA) Batteries for Stationary Applications
Revision of 1188-1996
|
|
|
|
| 1205-2000 |
|
Active - IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects of Class 1E Equipment Used in Nuclear Power Generating Stations
Reaffirmed 2007
|
|
|
|
| 1205-2000/Cor 1-2006 |
|
Active - IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations - Corrigendum 1: Thermal Aging Model Corrections
Corrigendum to 1205-2000 Reaffirmed 2007
|
|
|
|
| 1214-1992 |
|
Active - IEEE standard multichannel analyzer (MCA) histogram data
interchange format for nuclear spectroscopy
|
|
|
|
| 1255-2000 |
|
Active - IEEE guide for evaluation of torque pulsations during starting of synchronous motors
Reaffirmed 2006
|
|
|
|
| 1289-1998 |
|
Active - IEEE guide for the application of human factors engineering in the
design of computer-based monitoring and control displays for nuclear
power generating stations
|
|
|
|
| 1290-1996 |
|
Active - IEEE Guide for Motor Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations
Reaffirmed 2000 An interpretation is available
|
|
|
|
| 1310-1996 |
|
Active - IEEE trial use recommended practice for thermal cycle testing of
form-wound stator bars and coils for large generators
|
|
|
|
| 1346-1998 |
|
Active - IEEE recommended practice for evaluating electric power system
compatibility with electronic process equipment
|
|
|
|
| 1415-2006 |
|
Active - IEEE Guide for Induction Machinery Maintenance Testing and Failure Analysis
|
|
|
|
| 1434-2000 |
|
Active - IEEE Trial-Use Guide to the Measurement of Partial Discharges in
Rotating Machinery
An Errata is available
|
|
|
|
| 1455-1999 |
|
Active - IEEE standard for message sets for vehicle/roadside communications
|
|
|
|
| 1473-1999 |
|
Active - IEEE standard for communications protocol aboard trains
|
|
|
|
| 1474.1-2004 |
|
Active - IEEE Standard for Communications-Based Train Control (CBTC) Performance and Functional Requirements
Revision of 1474.1-1999
|
|
|
|
| 1474.2-2003 |
|
Active - IEEE standard for user interface requirements in communications-based train control (CBTC) systems
|
|
|
|
| 1474.3-2008 |
|
Active - IEEE Recommended Practice for Communications-Based Train Control (CBTC) System Design and Functional Allocations
|
|
|
|
| 1475-1999 |
|
Active - IEEE standard for the functioning of and interfaces among
propulsion, friction brake, and train-borne master control on rail rapid
transit vehicles
|
|
|
|
| 1476-2000 |
|
Active - IEEE standard for passenger train auxiliary power systems
interfaces
Reaffirmed 2008
|
|
|
|
| 1477-1998 |
|
Active - IEEE standard for passenger information system for rail transit
vehicles
|
|
|
|
| 1478-2001 |
|
Active - IEEE Standard for Environmental Conditions for Transit Rail Car Electronic Equipment
|
|
|
|
| 1482.1-1999 |
|
Active - IEEE standard for rail transit vehicle event recorders
|
|
|
|
| 1483-2000 |
|
Active - IEEE standard for verification of vital functions in
processor-based systems used in rail transit control
Reaffirmed 2007
|
|
|
|
| 1512-2006 |
|
Active - IEEE Standard for Common Incident Management Message Sets for Use by Emergency Management Centers
An Errata is available Revision of 1512-2000
|
|
|
|
| 1512.1-2006 |
|
Active - IEEE Standard for Common Traffic Incident Management Message Sets for Use by Emergency Management Centers
|
|
|
|
| 1512.2-2004 |
|
Active - IEEE Standard for Public Safety Traffic Incident Management Message Sets for Use by Emergency Management Centers
|
|
|
|
| 1512.3-2006 |
|
Active - IEEE Standard for Hazardous Material Incident Management Message Sets for Use by Emergency Management Centers
Revision of 1512.3-2002
|
|
|
|
| 1536-2002 |
|
Active - IEEE Standard for Rail Transit Vehicle Battery Physical Interface
Reaffirmed 2008
|
|
|
|
| 1553-2002 |
|
Active - IEEE trial-use standard for voltage-endurance testing of form-wound coils and bars for hydrogenerators
Reaffirmed 2007
|
|
|
|
| 1558-2004 |
|
Active - IEEE Standard for Software Documentation for Rail Equipment and Systems
|
|
|
|
| 1568-2003 |
|
Active - IEEE recommended practice for electrical sizing of nickel-cadmium batteries for rail passenger vehicles
|
|
|
|
| 1570-2002 |
|
Active - IEEE Standard for the Interface Between the Rail Subsystem and the Highway Subsystem at a Highway Rail Intersection
|
|
|
|
| 1580-2001 |
|
Active - IEEE Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Platforms
|
|
|
|
| 1609.1-2006 |
|
Active - IEEE Std. 1609.1 - 2006 IEEE Trial-Use Standard for Wireless Access in Vehicular Environments (WAVE) - Resource Manager
|
|
|
|
| 1609.2-2006 |
|
Active - IEEE Trial-Use Standard for Wireless Access in Vehicular Environments - Security Services for Applications and Management Messages
|
|
|
|
| 1609.3-2007 |
|
Active - IEEE Trial-Use Standard for Wireless Access in Vehicular Environments (WAVE) -- Networking Services
|
|
|
|
| 1609.4-2006 |
|
Active - IEEE Trial-Use Standard for Wireless Access in Vehicular Environments (WAVE) - Multi-channel Operation
|
|
|
|
| 1616-2004 |
|
Active - IEEE Std 1616 - 2004 IEEE Standard for Motor Vehicle Event Data Recorders (MVEDRs)
|
|
|
|
| 1624-2008 |
|
Active - IEEE Standard for organizational reliability capability
|
|
|
|
| 1776-2008 |
|
Active - IEEE recommended practice for thermal evaluation of unsealed or sealed insulation systems for AC electric machinery employing form- wound pre-insulated stator coils for machines rated 15 000 V and below
|
|
|
|
| P1776/D12, Jun 2008 |
|
Active Unapproved Draft - Draft Recommended Practice for Thermal Evaluation of Unsealed or Sealed Insulation Systems for AC Electric machinery Employing Form-Wound Pre-insulated Stator Coils for Machines Rated 15000 V and Below
|
|
|
|
| 309-1999: ANSI N42.3-1999 |
|
Active - IEEE standard test procedures and bases for Geiger-Mueller counters
|
|
|
|
| C37-91-2000 |
|
Active - IEEE guide for protective relay applications to power transformers
|
|
|
|
| C37.04-1999 |
|
Active - IEEE standard rating structure for AC high-voltage circuit breakers
An Errata is available Reaffirmed 2006
|
|
|
|
| C37.06.1-2000 |
|
Active - American National Standard Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated -Definite Purpose for Fast Transient Recovery Voltage Rise Times
|
|
|
|
| C37.09-1999 |
|
Active - IEEE standard test procedure for AC high-voltage circuit breakers
rated on a symmetrical current basis
Reaffirmed 2007
|
|
|
|
| C37.09a-2005 |
|
Active - IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Amendment 1: Capacitance Current Switching
Reaffirmed 2007
|
|
|
|
| C37.010-1999 |
|
Active - IEEE application guide for AC high-voltage circuit breakers rated
on a symmetrical current basis
Reaffirmed 2005
|
|
|
|
| C37.011-2005 |
|
Active - IEEE Application Guide for Transient Recovery Voltage for AC High-Voltage Circuit Breakers
Revision of C37.011-1994
|
|
|
|
| C37.012-2005 |
|
Active - IEEE Application Guide for Capacitance Current Switching for AC High-Voltage Circuit Breakers
Revision of C37.012-1979
|
|
|
|
| C37.10.1-2000 |
|
Active - IEEE guide for the selection of monitoring for circuit breakers
|
|
|
|
| C37.11-1997 |
|
Active - IEEE standard requirements for electrical control for AC
high-voltage circuit breakers rated on a symmetrical current basis
|
|
|
|
| C37.14-2002 |
|
Active - IEEE standard for low-voltage DC power circuit breakers used in enclosures
Reaffirmed 2008 Revision of C37.14-1999
|
|
|
|
| C37.16-2000 |
|
Active - American National Standard Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors- Preferred Ratings, Related Requirements, and Application Recommendations
|
|
|
|
| C37.17-1997 |
|
Active - American National Standard for Trip Devices for AC and General Purpose DC Low Voltage Power Circuit Breakers
|
|
|
|
| C37.18-1979 |
|
Active - IEEE Standard Field Discharge Circuit Breakers For Rotating Electric Machinery
|
|
|
|
| C37.20.1a-2005 |
|
Active - IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear Amendment 1: Short-Time and Short-Circuit Withstand Current Tests- Minimum Areas for Multiple Cable Connections
Reaffirmed 2007
|
|
|
|
| C37.20.2-1999 |
|
Active - IEEE Standard for Metal-Clad Switchgear
|
|
|
|
| C37.20.3-2001 |
|
Active - IEEE standard for metal-enclosed interrupter switchgear
|
|
|
|
| C37.20.4-2001 |
|
Active - IEEE standard for indoor AC switches (1kV-38kV) for use in
metal-enclosed switchgear
|
|
|
|
| C37.23-2003 |
|
Active - IEEE Std C37.23 - 2003 IEEE Standard for Metal-Enclosed Bus
Revision of C37.23-1987
|
|
|
|
| C37.24-2003 |
|
Active - IEEE guide for evaluating the effect of solar radiation on outdoor metal-enclosed switchgear
Revision of C37.24-1986
|
|
|
|
| C37.26-2003 |
|
Active - IEEE guide for methods of power factor measurement for low-voltage inductive test circuits
Reaffirmed 2009
|
|
|
|
| C37.30-1997 |
|
Active - IEEE standard requirements for high-voltage switches
|
|
|
|
| C37.35-1995 |
|
Active - IEEE guide for the application, installation, operation, and
maintenance of high-voltage air disconnecting and interrupter switches
|
|
|
|
| C37.40-2003 |
|
Active - IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
Reaffirmed 2009 Revision of C37.40-1993
|
|
|
|
| C37.42-1996 |
|
Active - American National Standard Specification for High-Voltage Expulsion Type Distribution Class Fuses, Cutouts, Fuse Disconnecting Switches and Fuse Links
|
|
|
|
| C37.47-2000 |
|
Active - American National Standard for High Voltage Current-Limiting Type Distribution Class Fuses and Fuse Disconnecting Switches
|
|
|
|
| C37.48-2005 |
|
Active - IEEE Std C37.48 - 2005 IEEE Guide for Application, Operation, and Maintenance of High-Voltage Fuses, Destribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
Revision of C37.48-1997
|
|
|
|
| C37.53.1-1989 |
|
Active - American National Standard High-Voltage Current-Limiting Motor-Starter Fuses - Conference Test Procedures
|
|
|
|
| C37.90.1-2002 |
|
Active - C37.90.1 IEEE Standard for Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus
Revision of C37.90.1-1989
|
|
|
|
| C37.90.2-2004 |
|
Active - IEEE Standard for Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers
Revision of C37.90.2-1995
|
|
|
|
| C37.90.3-2001 |
|
Active - IEEE standard electrostatic discharge tests for protective relays
Reaffirmed 2006
|
|
|
|
| C37.96-2000 |
|
Active - IEEE Guide for AC Motor Protection
Reaffirmed 2006
|
|
|
|
| C37.99-2000 |
|
Active - IEEE guide for the protection of shunt capacitor banks
Revision of C37.99-1990
|
|
|
|
| C37.100-1992 |
|
Active - IEEE standard definitions for power switchgear
|
|
|
|
| C37.103-2004 |
|
Active - IEEE Std C37.103 - 2004 IEEE Guide for Differential and Polarizing Relay Circuit Testing
Revision of C37.103-1990
|
|
|
|
| C50.12-2005 |
|
Active - IEEE Std C50.12 - 2005 IEEE standard for salient-pole 50 Hz and 60 Hz synchronous generators and generator/motors for hydraulic turbine applications rated 5 MVA and above
|
|
|
|
| C50.13-2005 |
|
Active - IEEE Std C50.13 - 2005 IEEE standard for cylindrical-rotor 50 Hz and 60 Hz synchronous generators rated 10 MVA and above
|
|
|
|
| C57.12.00-2000 |
|
Archived - IEEE standard general requirements for liquid-immersed distribution, power, and regulating transformers
|
|
|
|
| C57.12.10-1997 |
|
Active - American National Standard for Transformers- 230 kV and Below 833 / 958 through 8333 / 10 417 kVA, Single-Phase, and 750 / 862 through 60 000 / 80 000 / 100 000 kVA, Three-Phase Without Load Tap Changing; and 3750 / 4687 through 60 000 / 80 000 / 100 000 kVA with Load Tap Changing- Safety Requirement
An interpretation is available
|
|
|
|
| C57.12.21-1992 |
|
Active - American National Standard Requirements for Pad-Mounted, Compartmental-Type Self-Cooled, Single-Phase Distribution Transformers With High Voltage Bushings; High-Voltage, 34500 GRYD/19920 Volts and Below; Low-Voltage, 240/120 Volts; 167 kVA and Smaller
|
|
|
|
| C57.12.25-1990 |
|
Active - American National Standard for Transformers - Pad-mounted, Compartmental-type, Self-cooled, Single-phase Distribution Transformers with Separable Insulated High-voltage Connectors; High Voltage, 34 500 Grdy/ 19 920 Volts and Below; Low Voltage, 240/120 Volts; 167 Kva and Smaller Requirements
|
|
|
|
| C57.12.26-1992 |
|
Active - IEEE Standard for Pad-mounted, Compartmental-Type, Self-cooled, Three-phase Distribution Transformers for Use with Separable Insulated High-voltage Connectors (34 500 Grd Y/19 920 V and Below, 2500 Kva and Smaller)
|
|
|
|
| C57.12.40-2000 |
|
Archived - American National Standard for Secondary Network Transformers Subway and Vault Types (Liquid Immersed)-Requirements
|
|
|
|
| C57.12.40-2006 |
|
Active - IEEE Standard Requirements for Secondary Network Transformers, Subway and Vault Types (Liquid Immersed)
|
|
|
|
| C57.12.52-1981 |
|
Active - American National Standard Requirements for Sealed Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts
|
|
|
|
| C57.12.55-1987 |
|
Active - American National Standard for Transformers - Used in Unit Installations, Including Unit Substations-Conformance Standard
|
|
|
|
| C57.12.59-2001 |
|
Active - IEEE guide for dry-type transformer through-fault current duration
Reaffirmed 2006
|
|
|
|
| C57.12.80-2002 |
|
Active - IEEE standard terminology for power and distribution transformers
Revision of C57.12.80-1978
|
|
|
|
| C57.12.91-2001 |
|
Active - IEEE standard test code for dry-type distribution and power
transformers
An interpretation is available
|
|
|
|
| C57.13.2-2005 |
|
Active - IEEE Std. C57.13.2 - 2005 IEEE Standard Conformance Test Procedure for Instrument Transformers
|
|
|
|
| C57.91-1995 |
|
Active - IEEE guide for loading mineral-oil-immersed transformers
An Errata is available Reaffirmed 2002, 2004 An interpretation is available
|
|
|
|
| C57.91-1995/Cor 1-2002 |
|
Active - C57.91-1995/Cor 1-2002 IEEE guide for loading mineral-oil- immersed transformers corrigendum 1
|
|
|
|
| C57.94-1982 |
|
Active - IEEE recommended practice for installation, application, operation, and maintenance of dry-type general purpose distribution and power transformers
Reaffirmed 1987, 2000, 2006
|
|
|
|
| C57.96-1999 |
|
Active - IEEE guide for loading dry-type distribution and power transformers
|
|
|
|
| C57.100-1999 |
|
Active - IEEE standard test procedure for thermal evaluation of
liquid-immersed distribution and power transformers
|
|
|
|
| C57.104-2008 |
|
Active - IEEE guide for the interpretation of gases generated in oil-immersed transformers
|
|
|
|
| C57.109-1993 |
|
Active - IEEE guide for liquid-immersed transformer through-fault-current duration
|
|
|
|
| C57.111-1989 |
|
Active - IEEE guide for acceptance of silicone insulating fluid and its
maintenance in transformers
Reaffirmed 1995, 2003, 2009 An interpretation is available
|
|
|
|
| C57.121-1998 |
|
Active - IEEE guide for acceptance and maintenance of less flammable
hydrocarbon fluid in transformers
|
|
|
|
| C62.1-1989 |
|
Active - IEEE standard for gapped silicon-carbide surge arresters for AC
power circuits
|
|
|
|
| C62.2-1987 |
|
Active - IEEE guide for the application of gapped silicon-carbide surge
arresters for alternating current systems
|
|
|
|
| C62.11-2005 |
|
Active - IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV)
Revision of C62.11-1999
|
|
|
|
| 1299/C62.22.1-1996 |
|
Active - IEEE guide for the connection of surge arresters to protect
insulated, shielded electric power cable systems
|
|
|
|
| C62.41-1991 |
|
Active - IEEE recommended practice on surge voltages in low-voltage AC power
circuits
|
|
|
|
| C62.41.1-2002 |
|
Active - IEEE Std. C62.41.1 - 2002
|
|
|
|
| C62.41.2-2002 |
|
Active - IEEE recommended practice on characterization of surges in low-voltage (1000 V and less) AC power circuits
|
|
|
|
| C62.92-1989 |
|
Active - IEEE guide for the application of neutral grounding in electrical
utility systems. Part II - grounding of synchronous generator systems
|
|
|
|
| C62.92.1-2000 |
|
Active - IEEE guide for the application of neutral grounding in electrical
utility systems - Part 1: introduction
|
|
|
|
| C62.92.3-1993 |
|
Active - IEEE guide for the neutral grounding in electrical utility systems, Part III-Generator Auxiliary Sys
|
|
|
|
| C62.92.4-1991 |
|
Active - IEEE guide for the application of neutral grounding in electrical
utility systems, part IV - distribution
|
|
|
|
| C62.92.5-1992 |
|
Active - IEEE guide for the application of neutral grounding in electrical
utility systems, part V - transmission systems and subtransmission
systems
|
|
|
|
| C67.92-1987 |
|
Active - IEEE Guide For The Application Of Neutral Grounding In Electrical Utility Systems Part I-introduction
|
|
|
|
| N42.5-1965 |
|
Active - American National Standard Bases For GM Counter Tubes
|
|
|
|
| N42.6-1980 |
|
Active - American National Standard interrelationship of quartz-fiber electrometer type exposure meters and companion exposure meter chargers
|
|
|
|
| N42.12-1994 |
|
Active - American National Standard calibration and usage of
thallium-activated sodium iodide detector systems for assay of
radionuclides
|
|
|
|
| N42.15-1997 |
|
Active - American National Standard check sources for and verification of
liquid-scintillation counting systems
|
|
|
|
| N42.17A-2003 |
|
Active - American national standard for performance specifications for health physics instrumentation-portable instrumentation for use in normal environmental conditions
Revision of N42.17A-1989
|
|
|
|
| N42.17B-1989 |
|
Active - American National Standard performance specifications for health
physics instrumentation. Occupational airborne radioactivity monitoring
instrumentation
Reaffirmed 1994
|
|
|
|
| N42.17C-1989 |
|
Active - American National Standard performance specifications for health
physics instrumentation. Portable instrumentation for use in extreme
environmental conditions
Reaffirmed 1994,2009
|
|
|
|
| N42.18-2004 |
|
Active - American National Standard Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents
|
|
|
|
| N42.20-2003 |
|
Active - American National Standard Performance Criteria for Active Personnel Radiation Monitors
Revision of N42.20-1995
|
|
|
|
| N42.22-1995 |
|
Active - American National Standard - traceability of radioactive sources to
the National Institute of Standards and Technology (NIST) and Associated
Instrument Quality Control
|
|
|
|
| N42.23-1996 |
|
Active - American National Standard measurement and associated instrument
quality assurance for radioassay laboratories
|
|
|
|
| N42.25-1997 |
|
Active - American National Standard calibration and usage of alpha/beta
proportional counters
|
|
|
|
| N42.27-1999 |
|
Active - American National Standard for determination of uniformity of solid
gamma-emitting flood sources
|
|
|
|
| N42.28-2002 |
|
Active - American National Standard for calibration of germanium detectors for in-situ gamma-ray measurements
|
|
|
|
| N42.30-2002 |
|
Active - American national standard for performance specification for tritium monitors
|
|
|
|
| N42.31-2003 |
|
Active - American National Standard for measurement procedures for resolution and efficiency of wide-bandgap semiconductor detectors of ionizing radiation
|
|
|
|
| N42.32-2003 |
|
Archived - American National Standard Performance Criteria for Alarming Personal Radiation Detectors for Homeland Security
|
|
|
|
| N42.32-2006 |
|
Active - American National Standard Performance Criteria for Alarming Personal Radiation Detectors for Homeland Security
|
|
|
|
| N42.33-2003 |
|
Archived - American National Standard for Portable Radiation Detection Instrumentation for Homeland Security
|
|
|
|
| N42.33-2006 |
|
Active - American National Standard for Portable Radiation Detection Instrumentation for Homeland Security
|
|
|
|
| N42.34-2003 |
|
Archived - American National Standard Performance Criteria for Hand-held Instruments for the Detection and Identification of Radionuclides
|
|
|
|
| N42.34-2006 |
|
Active - American National Standard Performance Criteria for Hand-Held Instruments for the Detection and Identification of Radionuclides
|
|
|
|
| N42.35-2004 |
|
Archived - ANSI N42.35-2004 - American National Standard for Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security
|
|
|
|
| N42.35-2006 |
|
Active - American National Standard for Evaluation and Performance of Radiation Detection Portal Monitors for Use in Homeland Security
|
|
|
|
| ANSI N42.37-2006 |
|
Active - American National Standard for Training Requirements for Homeland Security Purposes Using Radiation Detection Instrumentation for Interdiction and Prevention
|
|
|
|
| N42.38-2006 |
|
Active - American National Standard Performance Criteria for Spectroscopy-Based Portal Monitors Used for Homeland Security
|
|
|
|
| N42.41-2007 |
|
Active - American National Standard Minimum Performance Criteria for Active Interrogation Systems Used for Homeland Security
|
|
|
|
| ANSI N42.42-2006 |
|
Active - American National Standard Data Format Standard for Radiation Detectors Used for Homeland Security
|
|
|
|
| N42.43-2006 |
|
Active - ANSI N42.43-2006
|
|
|
|
| N42.46-2008 |
|
Active - American National Standard for Determination of the Imaging Performance of X-Ray and Gamma-Ray Systems for Cargo and Vehicle Security Screening
|
|
|
|
| N42.48-2008 |
|
Active - American National Standard Performance Requirements for Spectroscopic Personal Radiation Detectors (SPRDs) for Homeland Security
|
|
|
|
| N317-1980 |
|
Active - American National Standard performance criteria for instrumentation used for inplant plutonium monitoring
|
|
|
|
| N320-1979 |
|
Active - American National Standards performance specifications for reactor emergency radiological monitoring instrumentation
|
|
|
|
| N322-1997 |
|
Active - American National Standard inspection, test, construction, and
performance requirements for direct reading electrostatic/electroscope
type dosimeters
|
|
|
|
| N323-1978 |
|
Active - American National Standard radiation protection instrumentation test and calibration
|
|
|
|
| N323A-1997 |
|
Active - American National Standard radiation protection instrumentation
test and calibration, portable survey instruments
An Errata is available
|
|
|
|
| N323B-2003 |
|
Active - American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instrumentation for Near Background Operation
|
|
|
|
| N323D-2002 |
|
Active - N323D American National Standard For Installed Radiation Protection Instrumentation
|
|
|
|
| N449.1-1978 |
|
Active - American National Standard Procedures For Periodic Inspection Of Cobalt-60 And Cesium-137 Teletherapy Equipment
|
|
|
|